On 2011/9/8 下午 04:53, Sense Zeng wrote: > I test the Clonezilla-live-1.2.9-19-i486, it's pxe boot can't work for me too. > Folow was what I do: > > 1) Use ubuntu 10.04.3 as server > > 2) Install atftpd as tftp server > > 3) Set path /tftpboot as tftpd root > > 4) download clonezilla-live-1.2.9-19-i486.zip and unzip. Copy all the > file in path cd/live/ to /tftpboot/clonezilla/ > > 5) Copy the files like pxelinux.0 to the tftp root, and edit the > default file like > ... > kernel clonezilla/vmlinuz > APPEND initrd=clonezilla/initrd.img boot=live config noswap > nolocales edd=on nomodeset ocs_live_run="ocs-live-general" > ocs_live_extra_param="" ocs_live_keymap="" ocs_live_batch="no" > ocs_lang="" vga=788 nosplash noprompt > fetch=tftp://172.16.3.14/clonezilla/filesystem.squashfs > ocs_server="172.16.3.14" > ... > > 6) Install dhcp3-server and set some thing like > ... > filename "/pxelinux.0"; > ... > > 7) Then set the workstation pxe boot. It away stop at > ... > Begin: Running /scripts/live-premount ... Waiting for ethernet card(s) > up... If this fails, maybe the ethernet card is not supported by the > kernel 2.6.39-2-486? > [10.101732] ADDRCONF(NETDEV_UP): eth0: link is not ready > IP-Config: eth0 hardware address 00:16:d3:be:9f:dd mtu 1500 DHCP RARP > [11.717627] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex > [11.717627] tg3 0000:02:00.0: eth0 : Flow control is off for TX and off for RX > [11.717627] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Maybe this is kernel support issue, especially the tg3 driver need some non-free firmware. So could you please give Clonezilla live 20110912-natty or 20110912-oneiric a try? They come with some of the non-free firmware and it might help. Steven. > > Don't know how to make it work :( > > 2011/8/17 Sense Zeng<opaper...@gmail.com>: >> I use the version is clonezilla-live-1.2.8-46-i686. Maybe I should >> test the new version. Thanks! >> >> 2011/8/17 Steven Shiau<ste...@nchc.org.tw>: >>> So now which version of Clonezilla live did you try? >>> Did you give the latest one, i.e. 1.2.10-6 a try? >>> >>> Steven. >>> >>> On 08/12/2011 04:23 PM, Sense Zeng wrote: >>>> Thanks for response! My computer just one network card. >>>> >>>> 2011/8/10 Steven Shiau<ste...@nchc.org.tw>: >>>>> Hi, >>>>> >>>>> On 08/08/2011 03:30 PM, Sense Zeng wrote: >>>>>> Thanks for your help and sorry for my late response. >>>>>> I try to use >>>>>> >>>>>> KERNEL Clonezilla-live-vmlinuz >>>>>> APPEND initrd=Clonezilla-live-initrd.img boot=live config noswap >>>>>> nolocales edd=on nomodeset ocs_live_run="ocs-live-general" >>>>>> ocs_live_extra_param="" ocs_live_keymap="" ocs_live_batch="no" >>>>>> ocs_lang="" vga=788 nosplash noprompt >>>>>> fetch=tftp://192.168.1.182/Clonezilla-live-filesystem.squashfs >>>>>> ocs_server="192.168.1.182" >>>>>> >>>>>> in my default file, but it doesn't work for me. It stop at "eth0: link >>>>>> becomes ready". >>>>> This looks like you have two or more network cards? >>>>>> Is it Clonezilla-live-vmlinuz and >>>>>> Clonezilla-live-initrd.img directly copy from the clonezhilla livecd? >>>>> Yes. The only differences are the file names. >>>>> >>>>> Steven. >>>>>> >>>>>> 2011/7/18 Steven Shiau<ste...@nchc.org.tw>: >>>>>>> >>>>>> Hi, >>>>>> Sorry for the late response. I am traveling in Europe. >>>>>> Sure. The config file is attached, and you can check the last part >>>>>> "label Clonezilla-live". >>>>>> >>>>>> Steven. >>>>>> >>>>>> On 07/06/2011 02:55 PM, Sense Zeng wrote: >>>>>>>>> Can you show me your pxelinux.cfg/default? Thanks! >>>>>>>>> >>>>>>>>> 2011/7/6 Steven Shiau<ste...@nchc.org.tw>: >>>>>>>>>> In that case, maybe the problem is on the NIC driver. At least >>>>>>>>>> Clonezilla >>>>>>>>>> live 1.2.8-46 works with my PXE server here. >>>>>>>>>> How about giving Clonezilla live 1.2.9-12 a try? >>>>>>>>>> >>>>>>>>>> Steven. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On 2011/7/1 >>>>>> H 08:28, Sense Zeng wrote: >>>>>>>>>>> >>>>>>>>>>> Server was ok. It can pxe boot the linux installer. It seams dhcpd >>>>>>>>>>> and >>>>>>>>>>> tftpd was work. >>>>>>>>>>> >>>>>>>>>>> 2011/7/1 Steven Shiau<ste...@nchc.org.tw>: >>>>>>>>>>>> >>>>>>>>>>>> Did you check /var/log/daemons.log, /var/log/syslog, >>>>>>>>>>>> /var/log/messages >>>>>>>>>>>> on your server? >>>>>>>>>>>> Maybe you can find some clues. >>>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> Steven Shiau<steven _at_ nchc org tw> <steven _at_ stevenshiau org> >>>>>>>>>> National Center for High-performance Computing, Taiwan. >>>>>>>>>> http://www.nchc.org.tw >>>>>>>>>> Public Key Server PGP Key ID: 1024D/9762755A >>>>>>>>>> Fingerprint: A2A1 08B7 C22C 3D06 34DB F4BC 08B3 E3D7 9762 755A >>>>>>>>>> >>>>>> >>>>>>> >>>>>>> >>>>> >>>>> -- >>>>> Steven Shiau<steven _at_ nchc org tw> <steven _at_ stevenshiau org> >>>>> National Center for High-performance Computing, Taiwan. >>>>> http://www.nchc.org.tw >>>>> Public Key Server PGP Key ID: 1024D/9762755A >>>>> Fingerprint: A2A1 08B7 C22C 3D06 34DB F4BC 08B3 E3D7 9762 755A >>>>> >>> >>> -- >>> Steven Shiau<steven _at_ nchc org tw> <steven _at_ stevenshiau org> >>> National Center for High-performance Computing, Taiwan. >>> http://www.nchc.org.tw >>> Public Key Server PGP Key ID: 1024D/9762755A >>> Fingerprint: A2A1 08B7 C22C 3D06 34DB F4BC 08B3 E3D7 9762 755A >>> >> -- Steven Shiau <steven _at_ nchc org tw> <steven _at_ stevenshiau org> National Center for High-performance Computing, Taiwan. http://www.nchc.org.tw Public Key Server PGP Key ID: 1024D/9762755A Fingerprint: A2A1 08B7 C22C 3D06 34DB F4BC 08B3 E3D7 9762 755A ------------------------------------------------------------------------------ Doing More with Less: The Next Generation Virtual Desktop What are the key obstacles that have prevented many mid-market businesses from deploying virtual desktops? How do next-generation virtual desktops provide companies an easier-to-deploy, easier-to-manage and more affordable virtual desktop model.http://www.accelacomm.com/jaw/sfnl/114/51426474/ _______________________________________________ Clonezilla-live mailing list Clonezilla-live@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/clonezilla-live
