On 09/20/2011 11:49 AM, Sense Zeng wrote: > I don't think it NIC support problem. Because on that host I install > ubuntu 11.04, it's working fine. And I use another mechine (different > type of NIC) pxe boot CloneZilla, it stop at the same place (show > something like ... eth0: link becomes ready). It seem like the > fetch=tftp://... step don't work. I do have no idea... It does work here... Did you find any clue in your system log file, e.g. /var/log/daemon.log, /var/log/syslog, /var/log/messages.
Steven. > > 2011/9/19 Steven Shiau <ste...@nchc.org.tw>: >> So do you know any version of GNU/Linux support your NIC? >> >> Steven. >> >> On 09/17/2011 04:11 PM, Sense Zeng wrote: >>> I try Clonezilla live 20110912-natty and 20110912-oneiric, it stop at >>> the same place. >>> >>> 2011/9/15 Steven Shiau <ste...@nchc.org.tw>: >>>> >>>> >>>> On 2011/9/8 下午 04:53, Sense Zeng wrote: >>>>> >>>>> I test the Clonezilla-live-1.2.9-19-i486, it's pxe boot can't work for me >>>>> too. >>>>> Folow was what I do: >>>>> >>>>> 1) Use ubuntu 10.04.3 as server >>>>> >>>>> 2) Install atftpd as tftp server >>>>> >>>>> 3) Set path /tftpboot as tftpd root >>>>> >>>>> 4) download clonezilla-live-1.2.9-19-i486.zip and unzip. Copy all the >>>>> file in path cd/live/ to /tftpboot/clonezilla/ >>>>> >>>>> 5) Copy the files like pxelinux.0 to the tftp root, and edit the >>>>> default file like >>>>> ... >>>>> kernel clonezilla/vmlinuz >>>>> APPEND initrd=clonezilla/initrd.img boot=live config noswap >>>>> nolocales edd=on nomodeset ocs_live_run="ocs-live-general" >>>>> ocs_live_extra_param="" ocs_live_keymap="" ocs_live_batch="no" >>>>> ocs_lang="" vga=788 nosplash noprompt >>>>> fetch=tftp://172.16.3.14/clonezilla/filesystem.squashfs >>>>> ocs_server="172.16.3.14" >>>>> ... >>>>> >>>>> 6) Install dhcp3-server and set some thing like >>>>> ... >>>>> filename "/pxelinux.0"; >>>>> ... >>>>> >>>>> 7) Then set the workstation pxe boot. It away stop at >>>>> ... >>>>> Begin: Running /scripts/live-premount ... Waiting for ethernet card(s) >>>>> up... If this fails, maybe the ethernet card is not supported by the >>>>> kernel 2.6.39-2-486? >>>>> [10.101732] ADDRCONF(NETDEV_UP): eth0: link is not ready >>>>> IP-Config: eth0 hardware address 00:16:d3:be:9f:dd mtu 1500 DHCP RARP >>>>> [11.717627] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex >>>>> [11.717627] tg3 0000:02:00.0: eth0 : Flow control is off for TX and off >>>>> for RX >>>>> [11.717627] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready >>>> >>>> Maybe this is kernel support issue, especially the tg3 driver need some >>>> non-free firmware. >>>> So could you please give Clonezilla live 20110912-natty or 20110912-oneiric >>>> a try? They come with some of the non-free firmware and it might help. >>>> >>>> Steven. >>>>> >>>>> Don't know how to make it work :( >>>>> >>>>> 2011/8/17 Sense Zeng<opaper...@gmail.com>: >>>>>> >>>>>> I use the version is clonezilla-live-1.2.8-46-i686. Maybe I should >>>>>> test the new version. Thanks! >>>>>> >>>>>> 2011/8/17 Steven Shiau<ste...@nchc.org.tw>: >>>>>>> >>>>>>> So now which version of Clonezilla live did you try? >>>>>>> Did you give the latest one, i.e. 1.2.10-6 a try? >>>>>>> >>>>>>> Steven. >>>>>>> >>>>>>> On 08/12/2011 04:23 PM, Sense Zeng wrote: >>>>>>>> >>>>>>>> Thanks for response! My computer just one network card. >>>>>>>> >>>>>>>> 2011/8/10 Steven Shiau<ste...@nchc.org.tw>: >>>>>>>>> >>>>>>>>> Hi, >>>>>>>>> >>>>>>>>> On 08/08/2011 03:30 PM, Sense Zeng wrote: >>>>>>>>>> >>>>>>>>>> Thanks for your help and sorry for my late response. >>>>>>>>>> I try to use >>>>>>>>>> >>>>>>>>>> KERNEL Clonezilla-live-vmlinuz >>>>>>>>>> APPEND initrd=Clonezilla-live-initrd.img boot=live config noswap >>>>>>>>>> nolocales edd=on nomodeset ocs_live_run="ocs-live-general" >>>>>>>>>> ocs_live_extra_param="" ocs_live_keymap="" ocs_live_batch="no" >>>>>>>>>> ocs_lang="" vga=788 nosplash noprompt >>>>>>>>>> fetch=tftp://192.168.1.182/Clonezilla-live-filesystem.squashfs >>>>>>>>>> ocs_server="192.168.1.182" >>>>>>>>>> >>>>>>>>>> in my default file, but it doesn't work for me. It stop at "eth0: >>>>>>>>>> link >>>>>>>>>> becomes ready". >>>>>>>>> >>>>>>>>> This looks like you have two or more network cards? >>>>>>>>>> >>>>>>>>>> Is it Clonezilla-live-vmlinuz and >>>>>>>>>> Clonezilla-live-initrd.img directly copy from the clonezhilla livecd? >>>>>>>>> >>>>>>>>> Yes. The only differences are the file names. >>>>>>>>> >>>>>>>>> Steven. >>>>>>>>>> >>>>>>>>>> 2011/7/18 Steven Shiau<ste...@nchc.org.tw>: >>>>>>>>>>> >>>>>>>>>> Hi, >>>>>>>>>> Sorry for the late response. I am traveling in Europe. >>>>>>>>>> Sure. The config file is attached, and you can check the last part >>>>>>>>>> "label Clonezilla-live". >>>>>>>>>> >>>>>>>>>> Steven. >>>>>>>>>> >>>>>>>>>> On 07/06/2011 02:55 PM, Sense Zeng wrote: >>>>>>>>>>>>> >>>>>>>>>>>>> Can you show me your pxelinux.cfg/default? Thanks! >>>>>>>>>>>>> >>>>>>>>>>>>> 2011/7/6 Steven Shiau<ste...@nchc.org.tw>: >>>>>>>>>>>>>> >>>>>>>>>>>>>> In that case, maybe the problem is on the NIC driver. At least >>>>>>>>>>>>>> Clonezilla >>>>>>>>>>>>>> live 1.2.8-46 works with my PXE server here. >>>>>>>>>>>>>> How about giving Clonezilla live 1.2.9-12 a try? >>>>>>>>>>>>>> >>>>>>>>>>>>>> Steven. >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> On 2011/7/1 >>>>>>>>>> >>>>>>>>>> H 08:28, Sense Zeng wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Server was ok. It can pxe boot the linux installer. It seams >>>>>>>>>>>>>>> dhcpd and >>>>>>>>>>>>>>> tftpd was work. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> 2011/7/1 Steven Shiau<ste...@nchc.org.tw>: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Did you check /var/log/daemons.log, /var/log/syslog, >>>>>>>>>>>>>>>> /var/log/messages >>>>>>>>>>>>>>>> on your server? >>>>>>>>>>>>>>>> Maybe you can find some clues. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> -- >>>>>>>>>>>>>> Steven Shiau<steven _at_ nchc org tw> <steven _at_ stevenshiau >>>>>>>>>>>>>> org> >>>>>>>>>>>>>> National Center for High-performance Computing, Taiwan. >>>>>>>>>>>>>> http://www.nchc.org.tw >>>>>>>>>>>>>> Public Key Server PGP Key ID: 1024D/9762755A >>>>>>>>>>>>>> Fingerprint: A2A1 08B7 C22C 3D06 34DB F4BC 08B3 E3D7 9762 755A >>>>>>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> Steven Shiau<steven _at_ nchc org tw> <steven _at_ stevenshiau org> >>>>>>>>> National Center for High-performance Computing, Taiwan. >>>>>>>>> http://www.nchc.org.tw >>>>>>>>> Public Key Server PGP Key ID: 1024D/9762755A >>>>>>>>> Fingerprint: A2A1 08B7 C22C 3D06 34DB F4BC 08B3 E3D7 9762 755A >>>>>>>>> >>>>>>> >>>>>>> -- >>>>>>> Steven Shiau<steven _at_ nchc org tw> <steven _at_ stevenshiau org> >>>>>>> National Center for High-performance Computing, Taiwan. >>>>>>> http://www.nchc.org.tw >>>>>>> Public Key Server PGP Key ID: 1024D/9762755A >>>>>>> Fingerprint: A2A1 08B7 C22C 3D06 34DB F4BC 08B3 E3D7 9762 755A >>>>>>> >>>>>> >>>> >>>> -- >>>> Steven Shiau <steven _at_ nchc org tw> <steven _at_ stevenshiau org> >>>> National Center for High-performance Computing, Taiwan. >>>> http://www.nchc.org.tw >>>> Public Key Server PGP Key ID: 1024D/9762755A >>>> Fingerprint: A2A1 08B7 C22C 3D06 34DB F4BC 08B3 E3D7 9762 755A >>>> >> >> -- >> Steven Shiau <steven _at_ nchc org tw> <steven _at_ stevenshiau org> >> National Center for High-performance Computing, Taiwan. >> http://www.nchc.org.tw >> Public Key Server PGP Key ID: 1024D/9762755A >> Fingerprint: A2A1 08B7 C22C 3D06 34DB F4BC 08B3 E3D7 9762 755A >> -- Steven Shiau <steven _at_ nchc org tw> <steven _at_ stevenshiau org> National Center for High-performance Computing, Taiwan. http://www.nchc.org.tw Public Key Server PGP Key ID: 1024D/9762755A Fingerprint: A2A1 08B7 C22C 3D06 34DB F4BC 08B3 E3D7 9762 755A ------------------------------------------------------------------------------ All the data continuously generated in your IT infrastructure contains a definitive record of customers, application performance, security threats, fraudulent activity and more. Splunk takes this data and makes sense of it. Business sense. IT sense. Common sense. http://p.sf.net/sfu/splunk-d2dcopy1 _______________________________________________ Clonezilla-live mailing list Clonezilla-live@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/clonezilla-live
