So do you know any version of GNU/Linux support your NIC? Steven.
On 09/17/2011 04:11 PM, Sense Zeng wrote: > I try Clonezilla live 20110912-natty and 20110912-oneiric, it stop at > the same place. > > 2011/9/15 Steven Shiau <ste...@nchc.org.tw>: >> >> >> On 2011/9/8 下午 04:53, Sense Zeng wrote: >>> >>> I test the Clonezilla-live-1.2.9-19-i486, it's pxe boot can't work for me >>> too. >>> Folow was what I do: >>> >>> 1) Use ubuntu 10.04.3 as server >>> >>> 2) Install atftpd as tftp server >>> >>> 3) Set path /tftpboot as tftpd root >>> >>> 4) download clonezilla-live-1.2.9-19-i486.zip and unzip. Copy all the >>> file in path cd/live/ to /tftpboot/clonezilla/ >>> >>> 5) Copy the files like pxelinux.0 to the tftp root, and edit the >>> default file like >>> ... >>> kernel clonezilla/vmlinuz >>> APPEND initrd=clonezilla/initrd.img boot=live config noswap >>> nolocales edd=on nomodeset ocs_live_run="ocs-live-general" >>> ocs_live_extra_param="" ocs_live_keymap="" ocs_live_batch="no" >>> ocs_lang="" vga=788 nosplash noprompt >>> fetch=tftp://172.16.3.14/clonezilla/filesystem.squashfs >>> ocs_server="172.16.3.14" >>> ... >>> >>> 6) Install dhcp3-server and set some thing like >>> ... >>> filename "/pxelinux.0"; >>> ... >>> >>> 7) Then set the workstation pxe boot. It away stop at >>> ... >>> Begin: Running /scripts/live-premount ... Waiting for ethernet card(s) >>> up... If this fails, maybe the ethernet card is not supported by the >>> kernel 2.6.39-2-486? >>> [10.101732] ADDRCONF(NETDEV_UP): eth0: link is not ready >>> IP-Config: eth0 hardware address 00:16:d3:be:9f:dd mtu 1500 DHCP RARP >>> [11.717627] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex >>> [11.717627] tg3 0000:02:00.0: eth0 : Flow control is off for TX and off >>> for RX >>> [11.717627] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready >> >> Maybe this is kernel support issue, especially the tg3 driver need some >> non-free firmware. >> So could you please give Clonezilla live 20110912-natty or 20110912-oneiric >> a try? They come with some of the non-free firmware and it might help. >> >> Steven. >>> >>> Don't know how to make it work :( >>> >>> 2011/8/17 Sense Zeng<opaper...@gmail.com>: >>>> >>>> I use the version is clonezilla-live-1.2.8-46-i686. Maybe I should >>>> test the new version. Thanks! >>>> >>>> 2011/8/17 Steven Shiau<ste...@nchc.org.tw>: >>>>> >>>>> So now which version of Clonezilla live did you try? >>>>> Did you give the latest one, i.e. 1.2.10-6 a try? >>>>> >>>>> Steven. >>>>> >>>>> On 08/12/2011 04:23 PM, Sense Zeng wrote: >>>>>> >>>>>> Thanks for response! My computer just one network card. >>>>>> >>>>>> 2011/8/10 Steven Shiau<ste...@nchc.org.tw>: >>>>>>> >>>>>>> Hi, >>>>>>> >>>>>>> On 08/08/2011 03:30 PM, Sense Zeng wrote: >>>>>>>> >>>>>>>> Thanks for your help and sorry for my late response. >>>>>>>> I try to use >>>>>>>> >>>>>>>> KERNEL Clonezilla-live-vmlinuz >>>>>>>> APPEND initrd=Clonezilla-live-initrd.img boot=live config noswap >>>>>>>> nolocales edd=on nomodeset ocs_live_run="ocs-live-general" >>>>>>>> ocs_live_extra_param="" ocs_live_keymap="" ocs_live_batch="no" >>>>>>>> ocs_lang="" vga=788 nosplash noprompt >>>>>>>> fetch=tftp://192.168.1.182/Clonezilla-live-filesystem.squashfs >>>>>>>> ocs_server="192.168.1.182" >>>>>>>> >>>>>>>> in my default file, but it doesn't work for me. It stop at "eth0: >>>>>>>> link >>>>>>>> becomes ready". >>>>>>> >>>>>>> This looks like you have two or more network cards? >>>>>>>> >>>>>>>> Is it Clonezilla-live-vmlinuz and >>>>>>>> Clonezilla-live-initrd.img directly copy from the clonezhilla livecd? >>>>>>> >>>>>>> Yes. The only differences are the file names. >>>>>>> >>>>>>> Steven. >>>>>>>> >>>>>>>> 2011/7/18 Steven Shiau<ste...@nchc.org.tw>: >>>>>>>>> >>>>>>>> Hi, >>>>>>>> Sorry for the late response. I am traveling in Europe. >>>>>>>> Sure. The config file is attached, and you can check the last part >>>>>>>> "label Clonezilla-live". >>>>>>>> >>>>>>>> Steven. >>>>>>>> >>>>>>>> On 07/06/2011 02:55 PM, Sense Zeng wrote: >>>>>>>>>>> >>>>>>>>>>> Can you show me your pxelinux.cfg/default? Thanks! >>>>>>>>>>> >>>>>>>>>>> 2011/7/6 Steven Shiau<ste...@nchc.org.tw>: >>>>>>>>>>>> >>>>>>>>>>>> In that case, maybe the problem is on the NIC driver. At least >>>>>>>>>>>> Clonezilla >>>>>>>>>>>> live 1.2.8-46 works with my PXE server here. >>>>>>>>>>>> How about giving Clonezilla live 1.2.9-12 a try? >>>>>>>>>>>> >>>>>>>>>>>> Steven. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On 2011/7/1 >>>>>>>> >>>>>>>> H 08:28, Sense Zeng wrote: >>>>>>>>>>>>> >>>>>>>>>>>>> Server was ok. It can pxe boot the linux installer. It seams >>>>>>>>>>>>> dhcpd and >>>>>>>>>>>>> tftpd was work. >>>>>>>>>>>>> >>>>>>>>>>>>> 2011/7/1 Steven Shiau<ste...@nchc.org.tw>: >>>>>>>>>>>>>> >>>>>>>>>>>>>> Did you check /var/log/daemons.log, /var/log/syslog, >>>>>>>>>>>>>> /var/log/messages >>>>>>>>>>>>>> on your server? >>>>>>>>>>>>>> Maybe you can find some clues. >>>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> Steven Shiau<steven _at_ nchc org tw> <steven _at_ stevenshiau >>>>>>>>>>>> org> >>>>>>>>>>>> National Center for High-performance Computing, Taiwan. >>>>>>>>>>>> http://www.nchc.org.tw >>>>>>>>>>>> Public Key Server PGP Key ID: 1024D/9762755A >>>>>>>>>>>> Fingerprint: A2A1 08B7 C22C 3D06 34DB F4BC 08B3 E3D7 9762 755A >>>>>>>>>>>> >>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>> >>>>>>> -- >>>>>>> Steven Shiau<steven _at_ nchc org tw> <steven _at_ stevenshiau org> >>>>>>> National Center for High-performance Computing, Taiwan. >>>>>>> http://www.nchc.org.tw >>>>>>> Public Key Server PGP Key ID: 1024D/9762755A >>>>>>> Fingerprint: A2A1 08B7 C22C 3D06 34DB F4BC 08B3 E3D7 9762 755A >>>>>>> >>>>> >>>>> -- >>>>> Steven Shiau<steven _at_ nchc org tw> <steven _at_ stevenshiau org> >>>>> National Center for High-performance Computing, Taiwan. >>>>> http://www.nchc.org.tw >>>>> Public Key Server PGP Key ID: 1024D/9762755A >>>>> Fingerprint: A2A1 08B7 C22C 3D06 34DB F4BC 08B3 E3D7 9762 755A >>>>> >>>> >> >> -- >> Steven Shiau <steven _at_ nchc org tw> <steven _at_ stevenshiau org> >> National Center for High-performance Computing, Taiwan. >> http://www.nchc.org.tw >> Public Key Server PGP Key ID: 1024D/9762755A >> Fingerprint: A2A1 08B7 C22C 3D06 34DB F4BC 08B3 E3D7 9762 755A >> -- Steven Shiau <steven _at_ nchc org tw> <steven _at_ stevenshiau org> National Center for High-performance Computing, Taiwan. http://www.nchc.org.tw Public Key Server PGP Key ID: 1024D/9762755A Fingerprint: A2A1 08B7 C22C 3D06 34DB F4BC 08B3 E3D7 9762 755A ------------------------------------------------------------------------------ BlackBerry® DevCon Americas, Oct. 18-20, San Francisco, CA Learn about the latest advances in developing for the BlackBerry® mobile platform with sessions, labs & more. See new tools and technologies. Register for BlackBerry® DevCon today! http://p.sf.net/sfu/rim-devcon-copy1 _______________________________________________ Clonezilla-live mailing list Clonezilla-live@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/clonezilla-live
