Super-multi-reply: On 9/20/07, Kin Wong <[EMAIL PROTECTED]> wrote: > Count me in as well.
> From: "sgrover" <[EMAIL PROTECTED]> > I'm game. Though I may need some lead time to fund the working board... > (or will my current SBC be sufficient?) > John E Jardine wrote: > > Well, if I sign up too then we just need to convince one other person > > *cough*Shawn*cough*. > >> On 9/19/07, Gustin Johnson <[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>> > >> wrote: > >> > I would be interested in this. On 9/19/07, Andrew Anderson <[EMAIL PROTECTED]> wrote: > I'd be very interested in any case. Ok, so let me get the list straight here. People who seem to be interested in an embeddedarm.com based workshop: 0. Me (confirmed) 1. Gustin Johnson 2. John Jardine 3. Shawn Grover 4. Kin Wong 5. Robert Lewko (already has a similar board) 6. Andrew Anderson People who seem to be interested in a WRT54GL based workshop: 1. Dan Graham 2. Kin Wong 3. probably others... but I'm more interested in the PC/104 workshop instead, since I have no experience with the WRT54GL at all... What will be required for the PC/104 workshop: * A PC/104 board (pref. one you either already know how to use, or one everyone else will be using) (or share one with someone else) * Power supply for your board (5V 2A for the TS7200 IIRC) * Compact Flash card (or whatever your board uses) * Serial console cable (or share one with someone else) - Something to program the flash card once (to load Linux.) we probably only need a couple of these and can share them - Some LEDs/switches, whatever you want to hook up to the board - Ethernet cable, a crossover unless you are bringing a router/switch as well - Various headers & ribbon cable (optional, but this is really the best way to interface with the I/O pins) If you don't have any of the above and want to attend, please make arrangements to get at least the minimal items (noted with a '*',) beforehand. Once I get a final list of attendees, I can (hopefully) order some TS-72xx boards and we can set a date. If anybody needs me to get any other stuff for them (headers/cable/various electronics/etc.) let me know and I'll order it from Digikey in one lot before the workshop. For hardware, we should pick something from this list: http://www.embeddedarm.com/epc/prod_SBC.htm That would be easier for me, anyway. Prices range from $130 to $270. Please reply with your confirmation and any other notes. -Mark C. _______________________________________________ clug-talk mailing list [email protected] http://clug.ca/mailman/listinfo/clug-talk_clug.ca Mailing List Guidelines (http://clug.ca/ml_guidelines.php) **Please remove these lines when replying
