Hi Dennis,
I have one.
The flat surface is the same elevation as the
handrail landing(s). On deck there is a
corresponding round spot with no non-skid. It
looks like the option was to mount a spring
supported turning block there to lead a control
line aft. I believe it would have been cut &
cover'd for nut & backing plate access.
I have no idea which optional control line it was
intended for and I have forgotten who I lent my
book "Sail Power" to, so I'm missing that bit of
70s reference. I know, it sucks!
Cheers, Rus
Sweet 35 mk-1
east side, Vancouver Isd... and recently
re-subscribed after a couple o' weeks in France
so I'm a bit outta touch on list matters
At 02:08 PM 30/11/2012, you wrote:
I'll see if I have one.
Joe Della Barba
[email protected]
-----Original Message-----
From: CnC-List [mailto:[email protected]] On Behalf Of Dennis C.
Sent: Friday, November 30, 2012 8:50 AM
To: [email protected]
Subject: Stus-List 35-1 headliner bump
On my 35-1 there is a molded protrusion in the headliner at the port forward
corner of the midships hatch. It's about 3 inches square. There is nothing
on the deck above it.
I've always wondered what it was for. Any ideas?
Dennis C.
Touché 35-1 #83
Mandeville, LA
Sent from my iPhone
_______________________________________________
This List is provided by the C&C Photo Album http://www.cncphotoalbum.com
[email protected]
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
[email protected]
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
[email protected]
