If you are going to use a razor, file off the corners so you are less likely to damage the gelcoat.
Doesn't oven cleaner work? Joel 35/3 Annapolis On Tue, Mar 11, 2014 at 10:01 AM, dwight <[email protected]> wrote: > Try a razor blade scraper...be careful until you get the knack, finish > up with polishing compound...is the paint on gelcoat? Wet the surface with > windex before you start using the razor blade scraper and keep it wet > throughout > > > ------------------------------ > > *From:* CnC-List [mailto:[email protected]] *On Behalf Of *kelly > petew > *Sent:* March 11, 2014 10:53 AM > *To:* cnc-list > *Subject:* Stus-List Boat Name Removal Techniques > > > > I want to change the name on my boat, which currently has a painted name > on the stern. > > The removal process is either mechanical, chemical, or some combo. > > Any thoughts on the best approach, including materials to use? > > thanks, > > Pete W. > > Siren Song > C&C30MKII > Deltaville, VA. > > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > [email protected] > > -- Joel 301 541 8551
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
