Belt sander or a router set at 1/16" peel. Takes all that sun-damaged gelcoat off so you don't have a "shadow" from the name. Build it back up afterwards.
Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC On 11 March 2014 10:06, Marek Dziedzic <[email protected]> wrote: > Firs triple check if this is paint and not some decal (I was 150% sure > that the home port name on my new(er) boat was painted, but it was some > fancy decal (very thin and very well holding)). > > Oven cleaner may or may not work. If you decide on doing it, make sure > that your work area is well protected; it will drip and ooze and your > gelcoat might change colour slightly. And if you do it on a hot day, make > sure that you don't breathe in the fumes; they are really noxious. > > For me, eventually, light rubbing compound and a lot of elbow grease did > the job. > > Good luck. > > Marek (in Ottawa) > > > ------------------------------ > > Message: 7 > Date: Tue, 11 Mar 2014 10:09:50 -0400 > From: Joel Aronson <[email protected]> > To: "[email protected]" <[email protected]> > Subject: Re: Stus-List Boat Name Removal Techniques > Message-ID: > <CAEL16P-3cSNKtEq7iK3_YFaOzXhJKftWddhnKPZvHvw=n56...@mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > > If you are going to use a razor, file off the corners so you are less > likely to damage the gelcoat. > > Doesn't oven cleaner work? > > Joel > 35/3 > Annapolis > > > > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > [email protected] > >
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
