Don I don't have a wiring diagram but there is a pull switch. I didn't check for voltage - yet. Thanks. Hope to see you on the Bay. I'm in south river.
On Saturday, July 12, 2014, Joel Aronson <joel.aron...@gmail.com> wrote: > Voltage. Bought new light thinking that was the problem but checked > voltage first. > > Thanks > > On Saturday, July 12, 2014, Joe Della Barba via CnC-List < > cnc-list@cnc-list.com > <javascript:_e(%7B%7D,'cvml','cnc-list@cnc-list.com');>> wrote: > >> You need to fix the light. An external light will have all kinds of >> reflections. The wire is prone to chafe on the steering cables and where it >> goes into the compass. It is pretty much a trace it back to the start from >> the compass end and see what the problem is operation. Dumb question – did >> you measure the voltage or is there a chance the bulb died? >> >> >> >> Joe Della Barba >> >> j...@dellabarba.com >> >> >> >> Coquina >> >> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Joel >> Aronson via CnC-List >> *Sent:* Saturday, July 12, 2014 12:02 PM >> *To:* cnc-list@cnc-list.com >> *Subject:* Stus-List binnacle light >> >> >> >> There is no power to my binnacle light. I've tried every breaker and >> switch. No luck. >> >> I can either trace the wiring back to the breaker or put a red LED in >> the navpod above the compass. >> >> Suggestions? >> >> >> >> -- >> Joel >> 301 541 8551 >> > > > -- > Joel > 301 541 8551 > -- Joel 301 541 8551
_______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com