Joe,

 

How can I tell if my tank in my 1974 ¾ ton is original? I have seen no rust
in my filters (yet). I know my supply line is relatively new but I was
already planning on replacing my fill and vent hoses. They look old and not
like the new hoses that are made for ethanol.

 

Thanks,

Skip

 

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Della
Barba, Joe via CnC-List
Sent: Tuesday, August 05, 2014 1:23 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List A4 engine problems

 

One more thing – early-mid 1970s C&C fuel systems would not be even CLOSE to
being safe in 2014. I have not one scrap of the original fuel system left.
The tank was ternplate, which will send a ton of rust through the engine
until it rusts right through and the hoses were NOT compatible with modern
fuel. If you have ANY part of the original fuel system it needs to go now.
This included the fill and vent hoses. My fill hose was dissolving from the
inside out and sending rubber chunks into the tank.

 

Joe Della Barba

Coquina

_______________________________________________
This List is provided by the C&C Photo Album

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go bottom of page 
at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Reply via email to