That is all well and good except that I don't trust the 18-8 steel as much as the 316. Nonetheless, definitely a better choice. Thank you for that reference
So assembly .. - marinetex or some hardened resin - 4200 - 1/2 in G10 plate - square washer - 316 washer lock washer - nut. Rick... they are still $5 a piece. Thank you Ahmet On Nov 24, 2015 11:35 AM, "Rick Brass via CnC-List" <cnc-list@cnc-list.com> wrote: > Damn. Wish I’d thought about McMaster-Carr when I did my boat 20-some > years ago. I paid more than $5 a plate way back then. > > > > Rick Brass > > Washington, NC > > > > > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Bill > Coleman via CnC-List > *Sent:* Tuesday, November 24, 2015 10:30 AM > *To:* cnc-list@cnc-list.com > *Cc:* Bill Coleman <colt...@verizon.net> > *Subject:* Re: Stus-List Update: Re: Keel attachment issues on a C&C 25 > > > > <<) please feel free to scold me :)>> > > > > OK, with that license, Ahmet, for chrissakes, quit pussyfooting around > and just buy the right washer for the job! > > 91122A140 <http://www.mcmaster.com/#91122A140> > > Just get some of these washers that McMaster has kindly put in stock for > you, and be done with it. > > I am assuming those are 1 inch bolts, if not, they have other sizes, such > as ¾” 91122A130 <http://www.mcmaster.com/#91122A130> > > > > Bill Coleman > > C&C 39 Erie, PA > > > > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
