When I had a RWC engine I ran the exhaust into the bucket and circulated the 
same antifreeze around and around until it got nice and hot.
Joe
Coquina

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Jeremy Ralph 
via CnC-List
Sent: Tuesday, December 13, 2016 14:21
To: cnc-list@cnc-list.com
Cc: Jeremy Ralph <jeremy.ra...@gmail.com>
Subject: Re: Stus-List freeze proofing


We poured it into the sea strainer with the engine running and pumping it 
through the system.  Poured about 5L in until it came out the exhaust (I 
think).  I do have concern though if the thermostat was routing it into the 
block.  I did warm up the engine first for ~20min under load with hopes that 
the thermostat would route the water to the block.

Based on what Markek is suggesting, I may not have used enough AF...
On Dec 13, 2016, at 10:50 AM, Joel Aronson 
<joel.aron...@gmail.com<mailto:joel.aron...@gmail.com>> wrote:
Adding AF to the sea strainer is not going to winterize the block or muffler.  
As Marek suggested, you need several bottles.
Stay warm!

Joel

_______________________________________________

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!

Reply via email to