Thanks Josh, that's what I suspected. The boat was well cared for and installs were all done by pros (I was told) so I should be ok to push ahead with the survey and hopefully become an owner like you guys :)
On Sat, Jul 1, 2017 at 11:06 PM, Josh Muckley via CnC-List < [email protected]> wrote: > C&C designed solid areas for through-hulls and transducers but any > aftermarket stuff may not have been installed in those locations. > > Josh Muckley > S/V Sea Hawk > 1989 C&C 37+ > Solomons, MD > > On Jul 1, 2017 10:04 PM, "Dan via CnC-List" <[email protected]> wrote: > > Sorry if this was sent twice - the first time I tried it I was not > registered but had no responses... > > I'm looking at a 1986 C&C 44 to buy. Before I get into paying for a survey > to check the core out with a moisture meter I'm wondering if any 44 owners > out there have had any problems with wet core? - when you remove through > hull fittings is the core isolated with solid glass to prevent egress or > can you visibly see the balsa core layer? > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > wish to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! > > > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > wish to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! > >
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
