The surveyor sent an assistant to take moisture meter readings ahead of the survey to save me money if it was a dud. He called me today with just those results to see how I would proceed. He then wanted to know if the boat was balsa cored below the water line. He hasn't been inside the boat yet or started the actual survey...
Sent from my iPhone > On Jul 10, 2017, at 7:37 PM, William Walker via CnC-List > <[email protected]> wrote: > > I am shocked too...i think I would be careful answering for him..this is what > you pay for... > Bill Walker > CnC 36 > > Sent from AOL Mobile Mail > > > > On Monday, July 10, 2017 John Irvin via CnC-List <[email protected]> > wrote: > > I'm surprised the surveyor doesn't know most of these answers himself. > > Sent from my iPhone > > On Jul 10, 2017, at 4:10 PM, Dan via CnC-List <[email protected]> wrote: > > Regarding the 1986 C&C 44 I'm buying: > > My surveyor got back to me having done only the moisture meter readings on > the hull and topsides. The results were not horrific but there are some areas > of concern and I have some questions for other C&C owners with Balsa cored > boats from around 1986. > > 1. The surveyor asked if the balsa extends below the water line or is the > boat solid glass waterline down? > > 2. There was a high moisture content found in the bow area, starboard side > below the waterline just below the chain locker area. Is there a water tank > there or could this be wet balsa? > > 3. There was a very high moisture content all around the shaft log (where the > propeller shaft protrudes) - Does anyone know why that would be? > > 4. There was slightly elevated moisture around the anchor windlass and foot > pedals. Was an electric windlass a standard install on a C&C44 or could this > moisture be due to someone cutting a hole themselves without isolating the > core? > > Thanks everyone, sorry, I know this was a little longer but It'd be great to > know what I'm dealing with! :) > > Dan > >> On Sat, Jul 1, 2017 at 11:03 PM, Dan <[email protected]> wrote: >> Sorry if this was sent twice - the first time I tried it I was not >> registered but had no responses... >> >> I'm looking at a 1986 C&C 44 to buy. Before I get into paying for a survey >> to check the core out with a moisture meter I'm wondering if any 44 owners >> out there have had any problems with wet core? - when you remove through >> hull fittings is the core isolated with solid glass to prevent egress or can >> you visibly see the balsa core layer? > > _______________________________________________ > > This list is supported by the generous donations of our members. If you wish > to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! > _______________________________________________ > > This list is supported by the generous donations of our members. If you wish > to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! > _______________________________________________ > > This list is supported by the generous donations of our members. If you wish > to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
