Thank-you Fred, it's very encouraging to hear that 44 owners out there are not dealing with any serious failures. I will definitely post up anything outstanding from the survey. I know her portlights and hatches are all original but not leaking (currently). I'm thinking they had them re-bedded at some point. I will definitely be seeking out replacements if the deal goes through.
On Sun, Jul 2, 2017 at 12:52 AM, Fred Hazzard via CnC-List < [email protected]> wrote: > As an owner of a 1986 44 I am very interested in the results of the survey > on your 44. I have had mine for 10 yrs and all is good. > Feel free to ask me questions. > > Fred Hazzard > S/V Fury > C&C 44 > Portland, Or > > > On Jul 1, 2017 7:36 PM, "Dan via CnC-List" <[email protected]> wrote: > >> I already did that on the hull and it sounds good and crisp. The topsides >> are hard to read because many areas are only 8-12 inches wide and you don't >> get the same sounds from those spots. The wider flatter sections sounded ok >> though. >> >> Dan >> >> On Sat, Jul 1, 2017 at 11:20 PM, Josh Muckley via CnC-List < >> [email protected]> wrote: >> >>> You could take a plastic mallet for yourself and percussion test in key >>> locations. >>> >>> Josh >>> >>> On Jul 1, 2017 10:17 PM, "Dan via CnC-List" <[email protected]> >>> wrote: >>> >>>> Thanks Josh, that's what I suspected. The boat was well cared for and >>>> installs were all done by pros (I was told) so I should be ok to push ahead >>>> with the survey and hopefully become an owner like you guys :) >>>> >>>> On Sat, Jul 1, 2017 at 11:06 PM, Josh Muckley via CnC-List < >>>> [email protected]> wrote: >>>> >>>>> C&C designed solid areas for through-hulls and transducers but any >>>>> aftermarket stuff may not have been installed in those locations. >>>>> >>>>> Josh Muckley >>>>> S/V Sea Hawk >>>>> 1989 C&C 37+ >>>>> Solomons, MD >>>>> >>>>> On Jul 1, 2017 10:04 PM, "Dan via CnC-List" <[email protected]> >>>>> wrote: >>>>> >>>>> Sorry if this was sent twice - the first time I tried it I was not >>>>> registered but had no responses... >>>>> >>>>> I'm looking at a 1986 C&C 44 to buy. Before I get into paying for a >>>>> survey to check the core out with a moisture meter I'm wondering if any 44 >>>>> owners out there have had any problems with wet core? - when you remove >>>>> through hull fittings is the core isolated with solid glass to prevent >>>>> egress or can you visibly see the balsa core layer? >>>>> >>>>> _______________________________________________ >>>>> >>>>> This list is supported by the generous donations of our members. If >>>>> you wish to make a contribution to offset our costs, please go to: >>>>> https://www.paypal.me/stumurray >>>>> >>>>> All Contributions are greatly appreciated! >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> >>>>> This list is supported by the generous donations of our members. If >>>>> you wish to make a contribution to offset our costs, please go to: >>>>> https://www.paypal.me/stumurray >>>>> >>>>> All Contributions are greatly appreciated! >>>>> >>>>> >>>> >>>> _______________________________________________ >>>> >>>> This list is supported by the generous donations of our members. If you >>>> wish to make a contribution to offset our costs, please go to: >>>> https://www.paypal.me/stumurray >>>> >>>> All Contributions are greatly appreciated! >>>> >>>> >>> _______________________________________________ >>> >>> This list is supported by the generous donations of our members. If you >>> wish to make a contribution to offset our costs, please go to: >>> https://www.paypal.me/stumurray >>> >>> All Contributions are greatly appreciated! >>> >>> >> >> _______________________________________________ >> >> This list is supported by the generous donations of our members. If you >> wish to make a contribution to offset our costs, please go to: >> https://www.paypal.me/stumurray >> >> All Contributions are greatly appreciated! >> >> > _______________________________________________ > > This list is supported by the generous donations of our members. If you > wish to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! > >
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
