The engine, transmission, and 125 amp alternator cost about $10k. Andy C&C 40 Peregrine
Andrew Burton 61 W Narragansett Newport, RI USA 02840 http://sites.google.com/site/andrewburtonyachtservices/ +401 965-5260 > On Sep 17, 2017, at 12:12, George Cone via CnC-List <cnc-list@cnc-list.com> > wrote: > > What is the cost if I can ask for just the motor > Thanks > George cone > c&c 40 > Unsinkable 2 > > > Sent from my Verizon, Samsung Galaxy smartphone > > > -------- Original message -------- > From: Jack Fitzgerald via CnC-List <cnc-list@cnc-list.com> > Date: 9/17/17 11:55 AM (GMT-05:00) > To: C&CList <cnc-list@cnc-list.com> > Cc: Jack Fitzgerald <j...@fitzgeraldforwarding.com> > Subject: Re: Stus-List Yanmar 3GMD replacement on C&C 34 > > Same here, just bought the new Yanmar 3YM30AE for our 39TM to replace 30+ > year old 3GM30F hopefull to begin installation early next week. Our mechanic > indicates that this engine will be basically a plug and play. This is have to > see. > > If the new engine is a trouble free as the old one I will be a happy camper. > > Best regards, > Jack Fitzgerald > HONEY - US12788\ > C&C 39TM > Savannah, GA USA > > >> On Sun, Sep 17, 2017 at 9:29 AM, Dave Godwin via CnC-List >> <cnc-list@cnc-list.com> wrote: >> Andy, >> >> What sort of fuel consumption change, if any, did you experience with the >> 3YM30AE installation? >> >> Best, >> Dave Godwin >> 1982 C&C 37 - Ronin >> Reedville - Chesapeake Bay >> Ronin’s Overdue Refit >> >>> On Sep 17, 2017, at 2:31 AM, Andrew Burton via CnC-List >>> <cnc-list@cnc-list.com> wrote: >>> >>> Just went from 3HM30 to a nice new 3YM30AE. It is an incredible difference; >>> quieter, smoother, smaller, and same economy for a little more speed. They >>> had to cut down the engine beds an inch or so, but otherwise is a huge >>> difference. I did most of the work getting the old engine out and helped >>> with the installation of the new one. Still had to pay the mechanic for 23 >>> hours labor to do the technical and electric stuff. >>> >>> Andy >>> C&C 40 >>> Peregrine >>> >>> Andrew Burton >>> 61 W Narragansett >>> Newport, RI >>> USA 02840 >>> >>> http://sites.google.com/site/andrewburtonyachtservices/ >>> +401 965-5260 >>> >>> On Sep 16, 2017, at 23:14, DON JONSSON via CnC-List <cnc-list@cnc-list.com> >>> wrote: >>> >>>> Hi >>>> >>>> It seems I have a leaking head gasket on my Yanmar engine. It is an old >>>> engine but only has 2,000 hours on it. I'm going to get some quotes on >>>> fixing it but I'm sure it won't be cheap and not sure it won't be a waste >>>> on an old engine. >>>> >>>> The boat is leaking a fair bit of oil which ends up in the bilge. The >>>> best guess when tracing the source is the gasket. Of course the leak is >>>> from an area that is very difficult to get a good look at. The boat has >>>> also suddenly taken to starting very poorly. Anyway those are the >>>> symptoms. >>>> >>>> Has any one replaced a similar engine? What with and how did it go? Any >>>> things to watch out for? >>>> >>>> Thanks >>>> Don >>>> Victoria, BC >>>> _______________________________________________ >>>> >>>> This list is supported by the generous donations of our members. If you >>>> wish to make a contribution to offset our costs, please go to: >>>> https://www.paypal.me/stumurray >>>> >>>> All Contributions are greatly appreciated! >>> _______________________________________________ >>> >>> This list is supported by the generous donations of our members. If you >>> wish to make a contribution to offset our costs, please go to: >>> https://www.paypal.me/stumurray >>> >>> All Contributions are greatly appreciated! >> >> >> _______________________________________________ >> >> This list is supported by the generous donations of our members. If you wish >> to make a contribution to offset our costs, please go to: >> https://www.paypal.me/stumurray >> >> All Contributions are greatly appreciated! >> > > _______________________________________________ > > This list is supported by the generous donations of our members. If you wish > to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
