What is the cost if I can ask for just the motor Thanks George cone c&c 40 Unsinkable 2
Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Jack Fitzgerald via CnC-List <cnc-list@cnc-list.com> Date: 9/17/17 11:55 AM (GMT-05:00) To: C&CList <cnc-list@cnc-list.com> Cc: Jack Fitzgerald <j...@fitzgeraldforwarding.com> Subject: Re: Stus-List Yanmar 3GMD replacement on C&C 34 Same here, just bought the new Yanmar 3YM30AE for our 39TM to replace 30+ year old 3GM30F hopefull to begin installation early next week. Our mechanic indicates that this engine will be basically a plug and play. This is have to see. If the new engine is a trouble free as the old one I will be a happy camper. Best regards, Jack Fitzgerald HONEY - US12788\ C&C 39TM Savannah, GA USA On Sun, Sep 17, 2017 at 9:29 AM, Dave Godwin via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: Andy, What sort of fuel consumption change, if any, did you experience with the 3YM30AE installation? Best, Dave Godwin 1982 C&C 37 - Ronin Reedville - Chesapeake Bay Ronin’s Overdue Refit<http://roninrebuild.blogspot.com/> On Sep 17, 2017, at 2:31 AM, Andrew Burton via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: Just went from 3HM30 to a nice new 3YM30AE. It is an incredible difference; quieter, smoother, smaller, and same economy for a little more speed. They had to cut down the engine beds an inch or so, but otherwise is a huge difference. I did most of the work getting the old engine out and helped with the installation of the new one. Still had to pay the mechanic for 23 hours labor to do the technical and electric stuff. Andy C&C 40 Peregrine Andrew Burton 61 W Narragansett Newport, RI USA 02840 http://sites.google.com/site/andrewburtonyachtservices/ +401 965-5260 On Sep 16, 2017, at 23:14, DON JONSSON via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: Hi It seems I have a leaking head gasket on my Yanmar engine. It is an old engine but only has 2,000 hours on it. I'm going to get some quotes on fixing it but I'm sure it won't be cheap and not sure it won't be a waste on an old engine. The boat is leaking a fair bit of oil which ends up in the bilge. The best guess when tracing the source is the gasket. Of course the leak is from an area that is very difficult to get a good look at. The boat has also suddenly taken to starting very poorly. Anyway those are the symptoms. Has any one replaced a similar engine? What with and how did it go? Any things to watch out for? Thanks Don Victoria, BC _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated! _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated! _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
