Might try checking the ground on the engine.  Mine had that problem a number of years ago, taking it off and cleaning it up solved the problem.  Of course mine is a diesel and yours is gas, but I would expect that the ground would be wired similarly.
Food for thought.

On 9/18/2017 8:15 PM, Randy Stafford via CnC-List wrote:
Hi Doug,

No noise whatsoever when I pushed the starter button.  It was as if there wasn’t enough current to activate the starter, but the batteries *did* have enough charge at the time.

Cheers,
Randy

On Sep 18, 2017, at 3:08 PM, svpegasus38 via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>> wrote:

Randy,
Are you getting any noise out of starter (click) when trying to start? Even if you are hydro locked you should hear a click at the starter solenoid if electrics are good. Check the coil for cracks, check points and condenser, or electronic pick-up, ignition switch for loose/bad connections.
Good luck.



Sent from my T-Mobile 4G LTE Device
Doug Mountjoy
POYC
Pegasus (for sale)
Lf38
Rebecca Leah LF39

-------- Original message --------
From: Randal Stafford via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>>
Date: 9/18/17 07:29 (GMT-08:00)
To: cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>
Cc: Randal Stafford <randy.staff...@comcast.net <mailto:randy.staff...@comcast.net>>
Subject: Stus-List A4 Cutting Out

Listers-

I’m having a problem with my Atomic 4, and hoped you might have some thoughts to share.

When I went out for a sail yesterday, she started right up, as always.  But then she cut out heading away from the marina.  Initially I suspected a fuel flow problem, as the petcock on the tank has become difficult to turn.  After ensuring the petcock was in the open position and the tank was full, she started right up again and ran smoothly for a good 10 minutes.  Then she cut out again, and wouldn’t start back up after some cranking.  I sailed for a couple hours anyway.  When I tried to start her to come back in, nothing happened when I pressed the starter button.  I assumed my batteries didn’t have enough amperage for the starter, after all the previous cranking, though my other electronics were running fine.  So I docked under sail power, pulled the batteries, and brought them home to charge.  They both tested at 12.7 volts and 83% charge when I put them on my charger.  Now they’re both at 100% and 12.9 volts.

So I now suspect a faulty ignition circuit, and possibly a faulty starter circuit.  Perhaps a loose connection or broken wire is having the same effect as pushing in the ignition switch.  I’ve yet to get into the lazarette and start tracing the wiring and testing with a multimeter, but that’s my next step.  I thought I’d write the list first to see if anyone has any quick hypotheses.

Thanks in Advance,
Randy Stafford
S/V Grenadine
C&C 301- #7
Ken Caryl, CO
_______________________________________________

This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray

All Contributions are greatly appreciated!
_______________________________________________

This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray

All Contributions are greatly appreciated!



_______________________________________________

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!


--
Boat_Sig Cheers,
    Jeff Nelson
    Muir Caileag
    C&C 30
    Armdale Y.C.
    Halifax


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!

Reply via email to