Tape a piece of 60 grit sandpaper to the mast. Rub a piece of teak, Starboard, UHMW or whatever up and down until it conforms to the mast. 2-3 beer job. Builds biceps. Better to hoist more beers.
Dennis C. On Feb 9, 2018 5:20 PM, "Josh Muckley via CnC-List" <cnc-list@cnc-list.com> wrote: > Ok Guys, > > I've been test fitting the whisker pole and track extensions to the mast > while it is pulled. I need an extra section of track to get the inboard > end of the pole high enough so that I can stow the pole on the mast. I'm > pretty much all set but I'm down to the chock which will hold the outboard > end of the pole. The chock has a flat base and needs to be mounted on the > curved leading edge of the mast. > > I'm interested in the collective wisdom as to how to handle this situation. > > > Thanks, > > Josh Muckley > S/V Sea Hawk > 1989 C&C 37+ > Solomons, MD > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray