Wow. How I re-bedded the keel (and lost my C&C smile). Very ambitious and
well done.
-----Original Message-----
From: ahycrace ahycrace via CnC-List
Sent: Wednesday, February 06, 2019 3:17 PM
To: cnc-list@cnc-list.com
Cc: ahycrace ahycrace
Subject: Re: Stus-List Prepping for 35-1 Keel Bolts/Smile Fix
Matt
when I did my backing plates I used colloidal silica and used wax paper
to allow the plates to be removed after everything set up. You must protect
the threads from the silica as well. http://gkolc3.wixsite.com/liberty
On February 6, 2019 at 12:22 PM Thomas Delaney via CnC-List
<cnc-list@cnc-list.com> wrote:
>
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each
and every one is greatly appreciated. If you want to support the list -
use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use
PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
