looks great. want to come do my panel? haha On Wed, Mar 31, 2021 at 5:46 PM Adam Hayden via CnC-List < cnc-list@cnc-list.com> wrote:
> Hello > > You may remember a few months ago I asked some questions about rewiring > the panel. I appreciate the advice at that time. After approx 50 hours I > am mostly done, it's not perfect but vastly improved. I built a harness > from the panel switches to my converted cutting board (it was almost the > right size and cost $7.00 as I didn't want to use plywood) distribution > system. All connectors were replaced, properly crimped and insulated heat > shrink to seal the connectors. > > I still have some heat shrink on the main cables (the elec tape is temp > while testing circuits tonight )and a bit of tidying/labeling to do. > > Here are some before and almost complete pictures. > https://www.dropbox.com/sc/nwdix2tprxtwrei/AACZ-0O_x9uw95LgakLVR1xHa > > This should be a little easier if I need to trace circuits. > > Adam Hayden > C&C36 > Pictou NS > > Sent from my Bell Samsung device over Canada’s largest network. > > > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu -- Douglas Mountjoy 253-208-1412 Port Orchard YC, WA Rebecca Leah C&C LandFall 39
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu