On Wed, 5 Nov 2008 18:42:33 -0800 (PST), abatrour <[EMAIL PROTECTED]> wrote: > > Also double check to make sure your LAN ip address isn't in the > 192.168.0.* > range. > I've wasted too much time making that mistake. > -- > View this message in context: > http://n2.nabble.com/USB-Networking-tp1461467p1463175.html > Sent from the Openmoko Community mailing list archive at Nabble.com.
Which is why my desktops (home and work) are set to use 192.168.0.201/30, and the FreeRunner is set to 192.168.0.202/30. (on first SSH after flash I change the FR settings for subnet, gateway and DNS) Better would be to go entirely 'elsewhere' within private IP address blocks, like 10.20.30.1/24 or something, but since the default IP on a FreeRunner after flashing is always 192.168.0.202/24, I gave ground and kept it there, just narrowed the subnet to /30 (two usable IPs, 192.168.0.201-202) so that only 102.168.0.200-203 are unworkable on my LAN. j _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community