Hi again, I couldn't resist to do some more testing, so I copied my QtMoko SDcard installation to NAND. QtMoko from NAND boots fine in most cases (see overview), it's suspend and resume that fails when overclocked. However, suspend and resume works fine with the original NAND U-boot and your default clocked U-boot. I've flashed the overclocked images exactly as you posted and flashed u-boot_env.in as well, no errors were reported during flashing. Here's an overview:
Tested under QtMoko v24, using different u-boot images flashed in NAND: + u-boot-gta02v5-1.3.1: works fine + u-boot.udfu_400_100_1.7: works fine - u-boot.udfu_450_112_1.65_1.9: won't boot (hangs on 'Starting kernel...') - u-boot.udfu_450_112_1.7_1.9_sdmax: won't boot (hangs on 'Starting kernel...') * u-boot.udfu_500_83_1.7: fails to resume after suspend * u-boot.udfu_500_83_1.7_1.8_CLK2: fails to resume after suspend * u-boot.udfu_533_88_1.7: fails to resume after suspend * u-boot.udfu_533_88_1.7_1.8_CLK2: fails to resume after suspend So most u-boot images boot fine with QtMoko v24 and report the correct speeds, but my phone doesn't wake up after suspend with any of the overclocked images; I have to remove the battery to be able to boot again. Even the 450Mhz-images you reported as 'working under qtmoko' fail with me, but I'm not sure if you tested suspend and resume. I'm using the default v24-kernel, based on 2.6.29 I believe. I hope my tests are of any help, if I need to test something else, please let me know. Cheers, Tha_Man -- View this message in context: http://openmoko-public-mailinglists.1958.n2.nabble.com/cpu-reclocking-to-500Mhz-overclocking-to-533Mhz-performance-tests-and-bootloader-images-tp5242777p5253190.html Sent from the Openmoko Community mailing list archive at Nabble.com. _______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
