On Sat, Jul 10, 2010 at 19:19, David Vermeille <[email protected]> wrote: > > > 2010/7/4 Tha_Man <[email protected]> >> >> Hi again, >> I couldn't resist to do some more testing, so I copied my QtMoko SDcard >> installation to NAND. QtMoko from NAND boots fine in most cases (see >> overview), it's suspend and resume that fails when overclocked. However, >> suspend and resume works fine with the original NAND U-boot and your >> default >> clocked U-boot. I've flashed the overclocked images exactly as you posted >> and flashed u-boot_env.in as well, no errors were reported during >> flashing. >> Here's an overview: >> >> Tested under QtMoko v24, using different u-boot images flashed in NAND: >> + u-boot-gta02v5-1.3.1: works fine >> + u-boot.udfu_400_100_1.7: works fine >> - u-boot.udfu_450_112_1.65_1.9: won't boot (hangs on 'Starting kernel...') >> - u-boot.udfu_450_112_1.7_1.9_sdmax: won't boot (hangs on 'Starting >> kernel...') >> * u-boot.udfu_500_83_1.7: fails to resume after suspend >> * u-boot.udfu_500_83_1.7_1.8_CLK2: fails to resume after suspend >> * u-boot.udfu_533_88_1.7: fails to resume after suspend >> * u-boot.udfu_533_88_1.7_1.8_CLK2: fails to resume after suspend >> >> So most u-boot images boot fine with QtMoko v24 and report the correct >> speeds, but my phone doesn't wake up after suspend with any of the >> overclocked images; I have to remove the battery to be able to boot again. >> Even the 450Mhz-images you reported as 'working under qtmoko' fail with >> me, >> but I'm not sure if you tested suspend and resume. I'm using the default >> v24-kernel, based on 2.6.29 I believe. >> >> I hope my tests are of any help, if I need to test something else, please >> let me know. >> >> Cheers, >> Tha_Man >> -- >> View this message in context: >> http://openmoko-public-mailinglists.1958.n2.nabble.com/cpu-reclocking-to-500Mhz-overclocking-to-533Mhz-performance-tests-and-bootloader-images-tp5242777p5253190.html >> Sent from the Openmoko Community mailing list archive at Nabble.com. >> >> _______________________________________________ >> Openmoko community mailing list >> [email protected] >> http://lists.openmoko.org/mailman/listinfo/community > > Hi, > > I'm using QtMoko on SD from a long time and wanted to give these uboot > versions (500 and 533) a try. I kept my uboot env because yours doesn't seem > to add any new parameters. > > They worked well but I have the same problems as Tha_Man : my FR doesn't > resume after suspend. > > Back to your 400 uboot, the same QtMoko (same partitions and uboot env) > suspends and resumes well. > > SHR-U suffers from the same symptoms. > > I hope you'll be able to track and solve this problem because FR is really > faster at 500 or 533 Mhz and that's great. > > -- > David > > _______________________________________________ > Openmoko community mailing list > [email protected] > http://lists.openmoko.org/mailman/listinfo/community > >
Try 450 or 465 versions. With them suspend and resume works well for me :) -- Sebastian Krzyszkowiak dos _______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
