On Sat, Jul 10, 2010 at 22:22, Sebastian Krzyszkowiak <d...@dosowisko.net> wrote: > On Sat, Jul 10, 2010 at 21:36, Sebastian Krzyszkowiak <d...@dosowisko.net> > wrote: >> On Sat, Jul 10, 2010 at 21:23, Tha_Man <jeroenb...@hotmail.com> wrote: >>> >>> Hi, >>> Gennady suggested the same thing, but the 450Mhz-settings fail on kernel >>> start (see my previous message, I haven't tried the 465 settings). These >>> settings need a recompiled kernel according to Gennady's first message, did >>> you recompile your kernel? If not, I'm very curious why it doesn't work for >>> me! I'm assuming you're running QtMoko v24 as well, either from SD or NAND. >>> >>> Cheers, >>> Tha_Man >> >> 450/112 and 465/116 settings work for me even with 1.55V (just tested) >> and it seems to not work for others, as they need at least 1.65V :x >> But I can't use 533/88 nor CLK3, so it seems to be kind of deal ;) (or >> just component tolerance :D) >> >> I'm using SHR with our default 2.6.32 kernel. > > If someone wants to test: > http://dos.openmoko.pl/overclock/qi-s3c2442-master_c38b062a609f1442-dos-465-116-1.55-1.8.udfu > Qi with CPU clocked at 465MHz with 1.55V and memory at 115MHz with > 1.8V (so no kernel patch needed) > http://dos.openmoko.pl/overclock/465-116-1.55-1.8.patch > > It works for me and so far seems to be stable, but most of you will > probably need memory voltage being bumped to 1.9V and for that you > need to patch kernel. > > I have GTA02A5 with date code 20080621. > > U-Boots compiled by gena2x are available at > http://bsdmn.com/openmoko/uboot500/
More Qi's to test at http://dos.openmoko.pl/overclock/ -- Sebastian Krzyszkowiak dos _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community