Thanks a lot! I have done some testing again, this time with Qi: the default QtMoko kernel (2.6.29-rc3) gives an error/kernel panic when booting with the (*any*) overclocked Qi, while the SHR-U kernel (2.6.32) *does* boot. I haven't tested SHR-U any further, but if you're saying it suspends and resumes fine, I believe you :-) I get nothing but a black screen and flashing AUX button with the QtMoko kernel, while the SHR-U kernel boots fine. So there is quite a difference in kernel config, or maybe even kernel version. I hope someone can find out what kernel config (or bootloader adjustments) is needed for the overclock to be successful (both under u-boot and Qi), because this still is very promising! Especially the different CPU voltages are very nice to experiment with, that should give a good balance between speed, heat and power consumption.
Cheers, Tha_Man -- View this message in context: http://openmoko-public-mailinglists.1958.n2.nabble.com/cpu-reclocking-to-500Mhz-overclocking-to-533Mhz-performance-tests-and-bootloader-images-tp5242777p5282436.html Sent from the Openmoko Community mailing list archive at Nabble.com. _______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
