On Tuesday 08 March 2011 22:29:22 Alfa21 wrote: > 2011-03-05@17:14 Alfa21 > > > 2011-03-05@12:42 Radek Polak > > > > > > * unable to connect wifi wpa2-psk > > > > > > Was is working in some older versions? It can be bug either in > > > wpa_supplicatant or in qmoko wifi plugin that creates configuration for > > > wpa_supplicant. Does it work when you setup wpa_supplicant from command > > > line? I am trying to connect WPA2-psk here and it does not work too :( > > > > previously I had v31 and it was ok, but only on the first attempt and > > then I needed to reboot (rebooted also because wifi didn't stop and > > battery drain empty in few hours) the blue led in v31 did never turn on > > while connected. > > before v31 it was all ok... IIRC > > hi, > I tried to manually configure the wifi link: > as you can read below, seems to be something different with the wpa driver > in v33...
Hmm i just tested wpa2-psk here at work and it works (only the first connect after reboot). But it can be of course different AP. You could try to enable Networking category in Settings->Logging and send me full log. Or you could try to replace wpa_supplicant with package from lenny. But I am not wifi expert so cant promise anything. Regards Radek _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community