On Thursday, October 27, 2016 7:43:27 PM CEST H. Nikolaus Schaller wrote: > Hi, > finally we got a time slot tomorrow to do the next > soldering tests for the GTA04A5. > The plan for tomorrow is try to solder 4 PoP systems > with different preparation: (...) > Puh. Quite costly to produce scrap since we will not > solder any other components and therefore we can > only do X-ray inspection and measure for short circuits. > There is no possibility to test if the DM3730 SoC would > work well and has really all pads connected.
Costly indeed and frustrating to have (out of necessity) so much time between test runs! > On the kernel side there is also some news. > The news is about the open source kernel driver. I > have finally managed to get it compiled again on > letux-4.9-rc2. And in a way that it is a simple kernel > module. Well, if you want to call a 4 MByte .ko "simple". > > modprobing on the GTA04 almost succeeds, except an > error message from the "reset framework". This was > expected, As it is the letux-kernel, does the same go for modprobing on the Pyra? > So thats it for today. And I hope I can bring some > news about the GTA04A5 tomorrow. Thanks, and good luck tomorrow! Boudewijn _______________________________________________ Community mailing list [email protected] http://lists.goldelico.com/mailman/listinfo.cgi/community http://www.tinkerphones.org
