>Date: Mon, 9 Dec 2002 12:54:45 -0800
>From: Gamba <[EMAIL PROTECTED]>

>>Sierra Proto-Express,
>>https://www.2justforyou.com/NASApp/sierraproject/jsp/tabs_quote_promotion_.jsp
>>, will do two proto-type four layer boards for about $135 total by
>>the time they're shipped.  The buyer must supply Gerber files for the
>>board design.
>>Jeff Walther
>
>Around here (silicon valley) the board prices depend on component lead count.
>Is their quote of $135 for any component lead count?

Yes, with some restrictions.   The details are on their web site 
https://www.2justforyou.com/NASApp/sierraproject/jsp/tabs_quote_ourproducts_.jsp 
:

==================================
No Touch Product Specifications.
Please note that these specifications may change over time as our 
promotion evolves. Please read these specs before you place your 
order.
Also see our Frequently Asked Questions page.
Your boards MUST conform to the following specs to be ordered as a No 
Touch Product:
Minimum Quatity 2 boards, 4 day turn, 2-layers or 4-layers, FR4, 
0.062" (+/-.006) thickness, plated holes expected (non-plated holes 
must not be on copper areas), Maximum plated hole size .246 inches, 
Maximum non-plated hole size .199 inches, Minimum Hole Size 15 mils 
(+/- 3) Finished, Solder Finish, Minimum 6 mil trace and space, Green 
LPI Mask, White Legend, Individual Route, 1 Part Number per order, 
Max dimensions 10.9" on one side and 7.9" on the other, Maximum Area 
of each board 85 square inches, No arrays, no step and repeats, no 
multiple parts and partnumbers, no slots, no internal routing, no 
gold.

Standard Copper Overplate: Surface pattern: Nominal 1 Oz./sq foot. 
(0.0013" to 0.002") (33 microns to 51 microns)
Plating on Hole Walls: 0.0008" to 0.0012" (20 microns to 30 microns)
===================================
Can someone let me know if the quote indicator on the left side comes 
out on the above.  Some times Eudora uses > when I chose "Paste as 
Quotation", which is as the gods intended and other times Eudora 
chooses to put this stupid solid vertical bar down the left side 
which doesn't seem to come through properly--at least not by the time 
the email gets back to me.

Jeff Walther

-- 
Compact Macs is sponsored by <http://lowendmac.com/>.

      Support Low End Mac <http://lowendmac.com/lists/support.html>

Compact Macs list info: <http://lowendmac.com/lists/compact.shtml>
The FAQ:                <http://macfaq.org/>
  --> AOL users, remove "mailto:";
Send list messages to:  <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:  <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/>


---------------------------------------------------------------
>The Think Different Store
http://www.ThinkDifferentStore.com
---------------------------------------------------------------


Reply via email to