My Reply follows quote. On 05/09/2003 15:54 [EMAIL PROTECTED] said: >> I installed a new (box unopened, shrinkwrap still on, etc.) Asante >> MC+30IET64 card into my SE/30. The SE/30 is running System 7.5.5, 250MB >> HDD, 128MB RAM. > >Hello. > >I changed the Slot Address on the card from 9 (the default) to A. > >I did a completely new installation of System 7.5 and the 7.5.3 update >and left off the Asante drivers this time. I am able to switch to >Ethernet in the AppleTalk control panel whereas I was not able to do so >before when I had the Asante drivers on System 7.5.5. > >I hooked up a crossover Ethernet cable between my Power Mac 7300/200 >and the SE/30 and switched both to use Ethernet for AppleTalk. Nothing >shows up in either machines' Chooser. I know AppleTalk is working on >both because I had to use it on both machines' printer ports to move >the 7.5.3 update over to the SE/30. I know the Ethernet port on the >7300 works because I keep it hooked up to my router and use it through >there. > >I also tried using a regular Ethernet cable between the SE/30 and my >Linksys BEFSR81 router and tried pinging the manually assigned IP >address. Ping came back saying the host was down. > >Any ideas? -------- And you turned on File Sharing on both machines?
Ken -- Compact Macs is sponsored by <http://lowendmac.com/>. Support Low End Mac <http://lowendmac.com/lists/support.html> Compact Macs list info: <http://lowendmac.com/lists/compact.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
