Finally! I fiddled around for a little bit longer with the Analog Board
and got it running. After adjusting the screen for perfect image, I figured
that the first thing I should do was try and get the thing to boot.
I connected the hard drive that came with the Mac (MacSNAP SCSI & RAM
cards installed) and when it goes to boot, it reads the disk, shows a happy
mac, and then goes back to the blinking disk again.. and over and over.. No
clue what's going on there.
So I figured I'd use a floppy to boot the machine. The eject mechanism
is stuck in the down position, so I have to manually hold the drive in the
up position to insert a disk, plus I don't remember if I even have any 400k
disks, but everything I've tried has gotten the X.
Any suggestions?
Thanks,
Chris
--
Compact Macs is sponsored by <http://lowendmac.com/>.
Support Low End Mac <http://lowendmac.com/lists/support.html>
Compact Macs list info: <http://lowendmac.com/lists/compact.shtml>
--> AOL users, remove "mailto:";
Send list messages to: <mailto:[EMAIL PROTECTED]>
To unsubscribe, email: <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/>
---------------------------------------------------------------
>The Think Different Store
http://www.ThinkDifferentStore.com
---------------------------------------------------------------
