Tried everything..same result. Thanks
On 11 Des, 18:57, Ceresia <[email protected]> wrote:
> On a happier note, I actually spent time today and found the manual
> for this specific mobo. Read through the first like 80 pages of this
> thing....
>
> You can connect 1 sata driver per connector. The sata drives should
> appear in BIOS and need to set them to AHCI or IDE mode....
>
> Inside BIOS, in integrated peripherals, go into On-Chip ATA devices,
> make sure RAID MODE is set to AHCI or IDE.
>
> Try hooking up 6 SATA drives, see if they work.
> Make sure all the power is connected to each drive.
> Make sure all 6 drives work individually.
>
> If that doesn't work, then go into the board RAID BIOS, try to add 1
> drive to a RAID array, spanning, striping, it should allow you to do
> one or the other.
> So basically you are using RAID, but only creating an array for each
> drive.
> After that go into windows
> START > RUN > diskmgmt.msc
> see if the drives are listed there?
> Report back with findings please
> :-)
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"Computer Tech Support" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/computer-tech-support?hl=en
-~----------~----~----~----~------~----~------~--~---
