If the meters are not indicating signal there is nothing on the
tape. Do you have a few different tapes to try?
Stewart
At 09:52 PM 5/7/2008, you wrote:
Eric S. Sande wrote:
I connected the RCA-to-Stereo patch cable. The Line Input is
active. While I have that active, the tape deck is still not
recognized. I double-checked the positioning of the patch cable
on, both, my sound card and, the tape deck. I didn't find any
problem with the positioning.
OK, one step at a time. When you play a tape do the meters
indicate signal, and when you plug in headphones to the "PHONES"
front panel output on the deck can you hear the sound?
The meters do not indicate signal. While I do have a pair of
earphones, I would need an adapter to get them to work because the
jack is a different size.
I'm saying, systematically, let's get the deck first, then the
connection to the 2ZS (is that a laptop card?) then the software.
The 2ZS is, the Creative Labs SoundBlaster Audigy 2ZS.
Christopher
*************************************************************************
** List info, subscription management, list rules, archives, privacy **
** policy, calmness, a member map, and more at http://www.cguys.org/ **
*************************************************************************
Rev. Stewart A. Marshall
mailto:[EMAIL PROTECTED]
Prince of Peace
Ozark, AL SL 82
*************************************************************************
** List info, subscription management, list rules, archives, privacy **
** policy, calmness, a member map, and more at http://www.cguys.org/ **
*************************************************************************
