Thank you for your quick response. I'm not sure I will be able to try what you suggested. Things have picked back up on my day job, so time has become limited.
Please note that I have been able to successfully upload new Pronto Hex Codes for my LogiTech 900 database and subsequently use them on 900. I did the uploading on a PC at work, but did the reprogramming on my MAC using the standard LogiTech support tool, so I guess I am a little puzzled by your statement "Support for the 900 was added relatively recently and it is not in a released version." since I did just do the standard download for the PC and it seemed to work fine. Somewhat off this problem, 1. Yes the two database questions (removing commands and rearranging the commands) where both questions relating to the LogiTech database. I noticed when I had asked LogiTech to add a couple of commands (before I discovered concordance), the new commands were added at the end, so either they were just being expedient or even LogiTech has no interface to do this kind of manipulation. 2. With about 50 commands to add, it is kind of a pain to add one command at a time, but, okay, it is a one- time deal. I would love to script this so that I could more easily check for errors. Doing this one at-a-time by hand invites typos, like the command I misnamed. JJRussell -----Original Message----- From: Scott Talbert [mailto:s...@techie.net] Sent: Tuesday, January 29, 2013 4:42 PM To: concordance-devel@lists.sourceforge.net Subject: Re: [concordance-devel] Concordance on the MAC On Tue, 29 Jan 2013, Russell, J.J. wrote: > Let me amend one of my previous statements. The name of the new > command > **does** appear in the LearnIr.EZTut file. I just missed it. Sorry > about that misinformation. I've attached the downloaded file. So it > may be what you hinted at, that Safari is not correctly conveying the > right information. If this is just a browser issue, I'll try Firefox > or Chrome. I was able to parse your file just fine, so I don't think that is actually the problem. > It appears that concordance is trying to download or learn the command > from the remote. It (concordance) wants to attach to the remote. I > have done this on a PC at work (clearly no remote attached) and > running concordance asks what I want to do, and I select the option to > add a Pronto Hex code, which, after I cut-and-paste said code in, it > transfers it to the browser's LogiTech window and nicely adds the command. > > I am using a 900. This is likely the problem. Support for the 900 was added relatively recently and it is not in a released version. So, for the time being, you're going to have to checkout the zwave_work_branch from CVS in order to get the version that supports the 900. Additionally, it hasn't been tested on a Mac, to my knowledge, so it will be interesting to see if it works. > 1. Anyway to delete a command from the list once I add it (I missed > named a command)? Are you talking about on the Logitech website? If so, I'm not sure. > 2. Anyway to rearrange the LogiTech's list of commands? Again, I'm assuming you mean on the website? If so, I'm not sure. I haven't used the IR learn capability much. Scott ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_jan _______________________________________________ concordance-devel mailing list concordance-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/concordance-devel ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_jan _______________________________________________ concordance-devel mailing list concordance-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/concordance-devel
