On Thu, 6 Jan 2000, Roger wrote:
> still get "exit abnormally -recieved signal 11....terminating...etc"
> errors/crash
>
> on the blue screen where that cursor starts, should show drive number. it
> doesn't. shows a blinking cursor with a blue background. does show the rest of
> the menu tho'. when ever you select "ok" or "location" it exits. selecting
> scsi allow s the menu to go to the scsi menu.
What hardware are you installing on (again :) ?
This kind of sounds like what i get with disks only on the HPT control
(i forgot the address, and if you saw where this thing sits you wouldn't
want to pull it out either)
> other earlier releases of network.img, cdrom.img (12.30.99) all work.
>
> if i try redhat's .img, i can select one or two hdd drives (hda4, etc) but
> that's it and then exits after making a selection with the previous said error.
>
> have yet to get the boot.msg off the network.img diskette (- don't know how to
> do this one).
mount network.img /mnt/disk -o loop
cp /mnt/disk/boot.msg ~/
umount /mnt/disk
mount /mnt/floppy
mv ~/boot.msg /mnt/floppy
> video card: nvidia geforce ddr chip
> hdd: wb ~25gb drive
>
>
--
MandrakeSoft http://www.mandrakesoft.com/
--Axalon
