http://qa.mandrakesoft.com/show_bug.cgi?id=2565
------- Additional Comments From [EMAIL PROTECTED] 2003-03-10 13:55 ------- With the last RC2, battery monitoring works fine with ACPI, and the fan is off from time to time (that never happened with ML 9.0 and APM). The only remaining issue is still reboot/shutdown that do not work. ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------- Reminder: ------- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: Here is my first report on ACPI on my laptop with ML9.1 rc1: - the power off at shutdown no longer works (it did with ML 9.0 and APM). - the reboot still doesn't work (like with ML 9.0 and APM). - all peripherals seem to work ok (USB mouse, sound, and ethernet) - klaptop displays the following message: "Your computer seems to have a partial ACPI installation. ACPI was probably enabled, but some of the sub-options were not - you need to enable at least 'AC Adaptor' and 'Control Method Battery' and then rebuild your kernel." I do not know if it is a klaptop bug, but not being able to see the battery level IS an issue. Finally, here comes the output at startup, if it can help: Mar 1 09:21:08 pcbarns kernel: BIOS-e820: 000000001fef0000 - 000000001feff000 (ACPI data) Mar 1 09:21:08 pcbarns kernel: BIOS-e820: 000000001feff000 - 000000001ff00000 (ACPI NVS) Mar 1 09:21:08 pcbarns kernel: ACPI: have wakeup address 0xc0001000 Mar 1 09:21:08 pcbarns kernel: ACPI: RSDP (v000 PTLTD ) @ 0x000f7710 Mar 1 09:21:08 pcbarns kernel: ACPI: RSDT (v001 SONY K5 01540.00000) @ 0x1fef9a50 Mar 1 09:21:08 pcbarns kernel: ACPI: FADT (v001 SONY K5 01540.00000) @ 0x1fefee4c Mar 1 09:21:08 pcbarns kernel: ACPI: BOOT (v001 PTLTD $SBFTBL$ 01540.00000) @ 0x1fefeec0 Mar 1 09:21:08 pcbarns kernel: ACPI: SSDT (v001 PTLTD POWERNOW 01540.00000) @ 0x1fefeee8 Mar 1 09:21:08 pcbarns kernel: ACPI: DSDT (v001 SONY K5 01540.00000) @ 0x00000000 Mar 1 09:21:08 pcbarns kernel: ACPI: BIOS passes blacklist Mar 1 09:21:08 pcbarns kernel: ACPI: MADT not present Mar 1 09:21:08 pcbarns kernel: Kernel command line: BOOT_IMAGE=linux ro root=30a devfs=mount hdc=ide-scsi acpi=on Mar 1 09:21:08 pcbarns kernel: ACPI: Subsystem revision 20030122 Mar 1 09:21:08 pcbarns kernel: ACPI-0262: *** Info: GPE Block0 defined as GPE0 to GPE15 Mar 1 09:21:08 pcbarns kernel: ACPI: Interpreter enabled Mar 1 09:21:08 pcbarns kernel: ACPI: Using PIC for interrupt routing Mar 1 09:21:08 pcbarns kernel: ACPI: System [ACPI] (supports S0 S3 S4 S5) Mar 1 09:21:08 pcbarns kernel: ACPI: PCI Root Bridge [PCI0] (00:00) Mar 1 09:21:08 pcbarns kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Mar 1 09:21:08 pcbarns kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 10 11 12) Mar 1 09:21:08 pcbarns kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) Mar 1 09:21:08 pcbarns kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12) Mar 1 09:21:08 pcbarns kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12) Mar 1 09:21:08 pcbarns kernel: ACPI: Embedded Controller [EC0] (gpe 1) Mar 1 09:21:08 pcbarns kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PPB_._PRT] Mar 1 09:21:08 pcbarns kernel: ACPI: Power Resource [PCR0] (off) Mar 1 09:21:08 pcbarns kernel: ACPI: Power Resource [PCR1] (off) Mar 1 09:21:08 pcbarns kernel: PCI: Using ACPI for IRQ routing Mar 1 09:21:08 pcbarns kernel: PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Mar 1 09:21:08 pcbarns kernel: apm: overridden by ACPI.
