On Wednesday 12 March 2003 04:51, Thomas Backlund wrote:
> This is a the mdk standard kernel linux-2.4.21-0.13mdk + my changes:
> http://www.iki.fi/tmb/Cooker/linux-2.4.21-0.13mdk-TmB.Fix1.tar.bz2
>
> Just unzip/untar it to / and run the included Install, and reboot...
>
> Please test it and let me now... both with and without acpi=off....
No difference for me, a Dell workstation with dual 2.0Ghz Xeon.
acpi=off makes no difference.
With the latest 9.0 kernel (.16-24), I see 1 (one) interrupt on both ide
channels on the second cpu, but nothing else.
dmesg of the test kernel with acpi:
Linux version 2.4.21-0.13-TmB.Fix1 ([EMAIL PROTECTED]) (gcc version
3.2.2 (Mandrake Linux 9.1 3.2.2-3mdk)) #2 SMP ke maalis 12 05:13:39 EET
2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ff77000 (usable)
BIOS-e820: 000000001ff77000 - 000000001ff79000 (ACPI NVS)
BIOS-e820: 000000001ff79000 - 0000000020000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
ACPI: have wakeup address 0xc0002000
found SMP MP-table at 000fe710
hm, page 000fe000 reserved twice.
hm, page 000ff000 reserved twice.
hm, page 000f0000 reserved twice.
On node 0 totalpages: 130935
zone(0): 4096 pages.
zone(1): 126839 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 DELL ) @ 0x000fd550
ACPI: RSDT (v001 DELL WS 530 00000.00008) @ 0x000fd564
ACPI: FADT (v001 DELL WS 530 00000.00008) @ 0x000fd598
ACPI: SSDT (v001 DELL st_ex 00000.04096) @ 0xfffe6255
ACPI: MADT (v001 DELL WS 530 00000.00008) @ 0x000fd60c
ACPI: BOOT (v001 DELL WS 530 00000.00008) @ 0x000fd678
ACPI: DSDT (v001 DELL dt_ex 00000.04096) @ 0x00000000
ACPI: BIOS passes blacklist
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 Pentium 4(tm) XEON(tm) APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Processor #2 Pentium 4(tm) XEON(tm) APIC version 16
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: apic_id 2 already used, trying 1
IOAPIC[0]: Assigned apic_id 1
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, IRQ 0-23
ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0]
trigger[0x0])
ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1]
trigger[0x3])
Using ACPI (MADT) for SMP configuration information
Kernel command line: devfs=mount vga=794 root=/dev/hda1 3
Initializing CPU#0
Detected 1993.998 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 3971.48 BogoMIPS
Memory: 513596k/523740k available (1584k kernel code, 9760k reserved,
1135k data, 156k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
CPU0: Intel(R) XEON(TM) CPU 2.00GHz stepping 04
per-CPU timeslice cutoff: 1463.39 usecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000040
ESR value after enabling vector: 00000000
Booting processor 1/2 eip 3000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 3984.58 BogoMIPS
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 3
Intel machine check reporting enabled on CPU#1.
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
CPU1: Intel(R) XEON(TM) CPU 2.00GHz stepping 04
Total of 2 processors activated (7956.07 BogoMIPS).
WARNING: No sibling found for CPU 0.
WARNING: No sibling found for CPU 1.
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 1-0, 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22,
1-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 16.
number of IO-APIC #1 registers: 24.
testing the IO APIC.......................
IO APIC #1......
.... register #00: 01000000
....... : physical APIC id: 01
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 1 1 0 0 0 1 1 71
0a 001 01 0 0 0 0 0 1 1 79
0b 001 01 0 0 0 0 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 001 01 0 0 0 0 0 1 1 91
0e 001 01 0 0 0 0 0 1 1 99
0f 001 01 0 0 0 0 0 1 1 A1
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1993.9560 MHz.
..... host bus clock speed is 99.6976 MHz.
cpu: 0, clocks: 996976, slice: 332325
CPU0<T0:996976,T1:664640,D:11,S:332325,C:996976>
cpu: 1, clocks: 996976, slice: 332325
CPU1<T0:996976,T1:332320,D:6,S:332325,C:996976>
Waiting on wait_init_idle (map = 0x2)
All processors have done init_idle
ACPI: Subsystem revision 20030122
PCI: PCI BIOS revision 2.10 entry at 0xfbe4e, last bus=4
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S3 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2.PCI3._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 15, disabled)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15, disabled)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15, disabled)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15, disabled)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 15)
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 9
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 5
IOAPIC[0]: Set PCI routing entry (1-16 -> 0xa9 -> IRQ 16)
00:00:01[A] -> 1-16 -> IRQ 16
IOAPIC[0]: Set PCI routing entry (1-17 -> 0xb1 -> IRQ 17)
00:00:01[B] -> 1-17 -> IRQ 17
Pin 1-16 already programmed
Pin 1-17 already programmed
IOAPIC[0]: Set PCI routing entry (1-18 -> 0xb9 -> IRQ 18)
00:00:02[C] -> 1-18 -> IRQ 18
IOAPIC[0]: Set PCI routing entry (1-19 -> 0xc1 -> IRQ 19)
00:00:02[D] -> 1-19 -> IRQ 19
Pin 1-19 already programmed
IOAPIC[0]: Set PCI routing entry (1-23 -> 0xc9 -> IRQ 23)
00:00:1f[C] -> 1-23 -> IRQ 23
Pin 1-17 already programmed
Pin 1-16 already programmed
Pin 1-17 already programmed
Pin 1-18 already programmed
Pin 1-19 already programmed
Pin 1-23 already programmed
Pin 1-16 already programmed
Pin 1-17 already programmed
Pin 1-18 already programmed
Pin 1-19 already programmed
Pin 1-16 already programmed
Pin 1-18 already programmed
Pin 1-19 already programmed
Pin 1-16 already programmed
Pin 1-17 already programmed
Pin 1-19 already programmed
Pin 1-16 already programmed
Pin 1-17 already programmed
Pin 1-18 already programmed
Pin 1-16 already programmed
Pin 1-17 already programmed
Pin 1-18 already programmed
Pin 1-19 already programmed
IOAPIC[0]: Set PCI routing entry (1-20 -> 0xd1 -> IRQ 20)
00:03:0c[A] -> 1-20 -> IRQ 20
IOAPIC[0]: Set PCI routing entry (1-21 -> 0xd9 -> IRQ 21)
00:03:0c[B] -> 1-21 -> IRQ 21
IOAPIC[0]: Set PCI routing entry (1-22 -> 0xe1 -> IRQ 22)
00:03:0c[C] -> 1-22 -> IRQ 22
Pin 1-23 already programmed
Pin 1-21 already programmed
Pin 1-22 already programmed
Pin 1-23 already programmed
Pin 1-20 already programmed
Pin 1-22 already programmed
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even
'acpi=off'
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
apm: disabled - APM is not SMP safe.
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x1
vesafb: framebuffer at 0xf8000000, mapped to 0xe0809000, size 32768k
vesafb: mode is 1280x1024x16, linelength=2560, pages=5
vesafb: protected mode interface info at c000:7d60
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... found (1280x1024, 41008 bytes).
Console: switching to colour frame buffer device 80x16
fb0: VESA VGA frame buffer device
pty: 1024 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
ICH2: IDE controller at PCI slot 00:1f.1
ICH2: chipset revision 4
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hda: Maxtor 6E040L0, ATA DISK drive
blk: queue c042d000, I/O limit 4095Mb (mask 0xffffffff)
hdc: GCR-8481B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=4998/255/63,
UDMA(100)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 >
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 161k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
reiserfs: checking transaction log (device 03:01) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
Mounted devfs on /dev
Freeing unused kernel memory: 156k freed
Real Time Clock Driver v1.10e
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 04:55:05 Mar 12 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:1f.2 to 64
usb-uhci.c: USB UHCI at I/O 0xff80, IRQ 19
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1f.4 to 64
usb-uhci.c: USB UHCI at I/O 0xff60, IRQ 23
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usbdevfs: remount parameter error
Adding Swap: 2088376k swap-space (priority -1)
hub.c: new USB device 00:1f.2-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x46d/0xc501) is not claimed by any
active driver.
reiserfs: checking transaction log (device 03:07) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 03:05) ...
usb.c: registered new driver usb_mouse
input0: Logitech USB Receiver on usb1:2.0
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
Using r5 hash to sort names
ReiserFS version 3.6.25
ohci1394: $Rev: 693 $ Ben Collins <[EMAIL PROTECTED]>
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[fe1ff000-fe1ff7ff] Max
Packet=[2048]
ieee1394: SelfID completion called outside of bus reset!
ieee1394: Host added: Node[00:1023] GUID[805b06004e78bd00] [Linux
OHCI-1394]
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
See Documentation/networking/vortex.txt
04:0b.0: 3Com PCI 3c905C Tornado at 0xec80. Vers LK1.1.18-ac
00:06:5b:bd:78:4e, IRQ 23
product code 0000 rev 00.6 date 06-18-02
Internal config register is 1840000, transceivers 0xa.
8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
MII transceiver found at address 24, status 782d.
Enabling bus-master transmits and whole-frame receives.
04:0b.0: scatter/gather enabled. h/w checksums enabled
Teemu
