http://qa.mandrakesoft.com/show_bug.cgi?id=1521
------- Additional Comments From [EMAIL PROTECTED] 2003-01-10 20:30 ------- l.s, i also reinstalled mandrake 9.1 and in lilo i added the parameters acpi=off and pci=noapic and the i could ping the other pc's and contakt the internet. So for me it works to Yesterday i was in Ede (holland) on a linux congres and one of the speakers was the maintainer of the 2.4 kernel. He also mentioned the acpi problem. And that it was not solved completely bug can be closed And i hope the acpi problem will be solved soon in the kernel. Op zaterdag 27 september 2003 18:02, schreef u: -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------- Reminder: ------- assigned_to: [EMAIL PROTECTED] status: ASSIGNED creation_date: description: l.s, Mandrake 9.1 beta 3 Pc medion (aldi) motherbord MD 5000 M_ATX onboard network card windows xp identification sis900 based PCI during start up bringing up interface eth 0 <ok> eth0 interrupt 19 Info centre network interfaces eth0 not shown. if config eth0 shown without the line inet adrr Bcast Mask (this line is missing) <configuratie><other>linuxconf networking host name and ip network devices hostname + domain kruissink10.thuis.nl adapter1 enabled manual kruissink10.thuis.nl aliasses kruissink10 ip 192.168.50.10 mask 255.255.255.0 netdevice eth0 kernel module sis900 dns 212.142.28.66 212.142.28.67 routing and gateways default 192.168.50.1 enable routing /var/log/messages kernel eth0 unknown PHY found at adress 0 kernel eth0 realtek RTL8201 PHY transceiver found at address 1 2 t/m 31 unknown kernel: eth0: using transceiver found at address 31 as default kernel: eth0: SiS 900 PCI Fast Ethernet at 0xec00, irq 19, 00:10:dc:c5:f3:19. ... ... ifplugd[778] warning could not get interface address ifplugd[778] using interface eth0/00:10:DC:C5:F3:19 with driver sis900 v1.08.06 9/24/2002 ... network bringing up interface eth0: succeeded why is PHY at address 31 taken as default realtec RTL8201 is at address 1 Windows Xp home can use the network card But also Lindows 3.0 succeded in using the network interface.
