On Wed, Dec 17, 2008 at 1:42 PM, Myles Watson <[email protected]> wrote: > serengeti.diff and dtc-links.diff make serengeti find all of its devices > correctly. > > serengeti.diff > - takes out the multiple links for the Opteron (they weren't working > correctly) > - adds the 8132 devices and makes them pci_a so they don't conflict with the > 8111 > - corrects the disabled flags (I think we should have a build error > somewhere when there are incorrect flags) > - moves the lpc device to the lpc bus > - adds back in the second Opteron > > Signed-off-by: Myles Watson <[email protected]> >
Acked-by: Marc Jones <[email protected]> But what about amd8151? > dtc-links.diff > - removes multiple link code. I know someone could probably fix it, but > it's broken and not needed for now. > It made siblings that were bridges be multiple links on the same device. > That messed a lot of things up for Serengeti. I think it could be changed > so that siblings with the same PCI identifier that are bridges become > multiple links. It's ugly, though. > > Signed-off-by: Myles Watson <[email protected]> > So how does this allow amd8151 to be on a separate link? > pci_match_v2.diff: > Even though Serengeti seems to work the same as v2, it still won't show > anything on the display. The VGA device is not claiming the 0xa0000-0xc0000 > address space. Since SimNOW is a simulator, I trace the memory space to see > that the VGA writes are going to RAM. > > I put this in to make the PCI config space bit-for-bit identical at VGA ROM > run. It still doesn't work. :( Any help would be appreciated. You have probably look but amdk8_create_vga_resource is working correctly? Marc -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
