----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- Dennis; I put new Belleville springs on our Coupe this spring, and I had to put the 7/16 spacer on the top of the stack in order to get the proper tail height. So if your springs are OK, I would just add the spacers. Lee at Skyport has them for less than $20. As far as the correct oil in the struts is concerned, if you have not replaced the O-rings with the brake cup parts, you should be using the red hydraulic fluid, MIL H 5606. If the O-rings, on the bottom of the main gear shock pistons, have been replaced with the brake cup, then you should be using a quality automotive disk brake fluid. The nose strut should still require the MIL H 5606. Lynn Nelsen N99387 52FL
--------------------------------- to unsubscribe send mailto:[EMAIL PROTECTED] ___________________________________________________________ T O P I C A The Email You Want. http://www.topica.com/t/16 Newsletters, Tips and Discussions on Your Favorite Topics
<<attachment: winmail.dat>>
