----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- Found the Fix, Pulled carb mixture control apart, found the lever on top in the 180 out position so the holes on the mixture plate not lining up correctly. Made the whole thing run off of the low speed or idle jets. Put all back together, running great. Not much longer and have it ready for signoff.
Alan Alan Lail wrote: > Hello all, I bet you have discussed this problem before, but here we go > again. > I just hung my C-85 and can not seem to get above 1400RPM. I can only > get to that point by applying carb heat. I have adjusted the fuel > mixture on the back of the carb and have checked to see if my mixture is > wired to the rich position, all seems normal. It fires up easy and runs > great up to about 1250-1300, then gets to coughing like it needs more > fuel, I give it carb heat and get a few hundred more RPMs, but thats > all. Any ideas > > Alan > [EMAIL PROTECTED] or call 360-892-3206 Vancouver area > --------------------------------- to unsubscribe send mailto:[EMAIL PROTECTED] ___________________________________________________________ T O P I C A The Email You Want. http://www.topica.com/t/16 Newsletters, Tips and Discussions on Your Favorite Topics
<<attachment: winmail.dat>>
