----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- It definitely sounds like a lean situation to me. By gaining RPM with carb heat, indicates a lean motor. I don't know the inner workings of these carbs, but I'd guess it's a fuel delivery situation. Either a partially plugged jet or line. Did you have the carb overhauled? I'd bet that will cure the problem.
Larry Alan Lail wrote: > ----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- > Hello all, I bet you have discussed this problem before, but here we go > again. > I just hung my C-85 and can not seem to get above 1400RPM. I can only > get to that point by applying carb heat. I have adjusted the fuel > mixture on the back of the carb and have checked to see if my mixture is > wired to the rich position, all seems normal. It fires up easy and runs > great up to about 1250-1300, then gets to coughing like it needs more > fuel, I give it carb heat and get a few hundred more RPMs, but thats > all. Any ideas > > Alan > [EMAIL PROTECTED] or call 360-892-3206 Vancouver area > > --------------------------------- > to unsubscribe send mailto:[EMAIL PROTECTED] > ___________________________________________________________ > T O P I C A The Email You Want. http://www.topica.com/t/16 > Newsletters, Tips and Discussions on Your Favorite Topics --------------------------------- to unsubscribe send mailto:[EMAIL PROTECTED] ___________________________________________________________ T O P I C A The Email You Want. http://www.topica.com/t/16 Newsletters, Tips and Discussions on Your Favorite Topics
<<attachment: winmail.dat>>
