----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Dear Bill. Welcome back to the Coupers world. The alteration you have planned has been done several times. See the attached image and follow the URL's below. http://iciclecreek.com/cgi-bin/ceilidh.exe/337s/?C3d114ede7Hqk-3369-684-00 .htm http://iciclecreek.com/cgi-bin/ceilidh.exe/337s/?C3d114ede7Hqk-3369-685+00 .htm http://iciclecreek.com/cgi-bin/ceilidh.exe/337s/?C3d114ede7Hqk-3369-686+00 .htm http://iciclecreek.com/cgi-bin/ceilidh.exe/337s/?C3d114ede7Hqk-3369-687+00 .htm http://iciclecreek.com/cgi-bin/ceilidh.exe/337s/?C3d114ede7Hqk-3369-688+00 .htm http://iciclecreek.com/cgi-bin/ceilidh.exe/337s/?C3d114ede7Hqk-3369-689+00 .htm http://iciclecreek.com/cgi-bin/ceilidh.exe/337s/?C3d114ede7Hqk-3369-690+00 .htm http://iciclecreek.com/cgi-bin/ceilidh.exe/337s/?C3d114ede7Hqk-3369-691+00 .htm Hartmut N3330H Bill Cripe wrote: > > ----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- > > Hi folks, I am new to the list. I owned an ercoupe 13 years ago. > Only for > a few months unfortunately. Ten years ago I was injured in a super > cub. I > now manage a large aircraft management company in so cal and am > looking at > getting back into flying. My question is this. Since I now use a > wheelchair > it is very hard to get in and out of an ercoupe. Is it possible to > cut out > the area below the side window and install a door? Or is there > structure in > the area above the wing to the window sill that could not be modified? > I > have a full maintenance shop that could handle this type of > modification if > it is possible. Any information would be greatly appreciated. > > Thanks, > Bill Cripe > ==^================================================================ EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Sid.bAhN69 Or send an email To: [EMAIL PROTECTED] This email was sent to: [EMAIL PROTECTED] T O P I C A -- Register now to manage your mail! http://www.topica.com/partner/tag02/register ==^================================================================
<<attachment: winmail.dat>>
