----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
In a message dated 1/18/02 7:16:43 PM Eastern Standard Time, [EMAIL PROTECTED] writes: > In a message dated 1/18/02 3:04:24 PM Eastern Standard Time, > [EMAIL PROTECTED] writes: > > > Place the suction cut over the > > sealer and rivet. Get a good seal and apply a little compressed > air. > > > This will force the sealer into the rivet > > How about using a vacuum cleaner to apply a little suction to the > inside of the tank? Sounds like it might be easier to manage. In a message dated 1/20/02 5:20:30 PM Eastern Standard Time, [EMAIL PROTECTED] writes: > NO! NO! NO! You will collapse the tank before you > can pull the vacuum nozzle away from the tank. I hadn't thought of this. Actually, it surprises me that a vacuum cleaner could generate enough suction to collapse the tank, but then again maybe I need a new one. However, I also thought of another reason why this might not be a good idea. If there were a significant concentration of fumes in the tank, an electric vacuum could present a danger of fire or explosion. On the other hand, a vacuum pump like the ones used in air-conditioning, or a venturi type that runs on compressed air would be safer, but they I'm sure could collapse the tank if not monitored carefully. Y'all be careful out there. John ==^================================================================ This email was sent to: [EMAIL PROTECTED] EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Sid.bAhN69 Or send an email to: [EMAIL PROTECTED] T O P I C A -- Register now to manage your mail! http://www.topica.com/partner/tag02/register ==^================================================================
<<attachment: winmail.dat>>
