|
Hello all!
SOLUTION!
I found that if I build the courier RPM's from
source I get a special
RPM with all the smtp-auth stuff! Without it all
the config files can be
just fine but you get no auth on esmtp!!!! Also you
get no errors or such
when starting esmtp nor anything in the logs
stating the auth can't run.
1) So! Install the courier-smtpauth
package
2) Enable the authentication in the esmtp config
file.
AUTHMODULES="authdaemon"
ESMTPAUTH="LOGIN CRAM-MD5" (works with KMail
and OutLockExpress)
3) Restart the esmtp service.
4) Verify with running telnet <smtpserverip>
<smtpport> and send the EHLO <myhostname>
If the reply containg an
250-AUTH .... line, auth is OK!
5) Go ahead and send mail! :o)
TIP!
If you whant to protect your server from auth
eavesdropping don't allow auth-smtp on
port 25. Let this be
for local delivery only. Setup the esmpt-ssl to force SSL/TLS and
allow auth. This way
you have better protection on your authentication process.
I always try to
avoid any auth on non-encrypted
connection...
/Jonas
|
BEGIN:VCARD VERSION:2.1 N:Printz�n;Jonas FN:Jonas Printz�n EMAIL;PREF;INTERNET:[EMAIL PROTECTED] REV:20021004T083238Z END:VCARD
