I've got a cheaper easier solution... Everybody's got that ultra-cheap, crap tool store near them. Stop in and grab a cheap set of little vise-grips. Just clamp the Vise-grips on the internal rod of the strut on 1 side and if you've got it tight enough it'll hold far more than the weight of the deck lid.
-Nate Ex-91 Dx-R owner ----- Original Message ----- From: "Mark Humphreys" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Monday, July 22, 2002 1:30 PM Subject: Re: CRX: hydraulift hatch lifts > Just bend 'em a little? My dad's 88hf will try and eat you if you open the > hatch and forget to put a stick in it's mouth.... painful...very painful. > -M > > > >At 11:10 PM 7/21/02 -0400, Scott Mullin wrote: > > >> how do i take the hydro hatch lifts stands out? > > > >If Roger Twitchell was here he would advise a different solution. If your > >struts are worn out, open the hatch, and push against one strut, near the > >middle of it. You can put a very slight bend in in, not enough to be > >visible, and once it has a slight bend, it will not allow the hatch to fall > >down. Try it out..... > > > >Later > >Dave > > > > > _________________________________________________________________ > MSN Photos is the easiest way to share and print your photos: > http://photos.msn.com/support/worldwide.aspx > >
