On 6/26/06, Cecil <[EMAIL PROTECTED]> wrote:
> Hello all, It was good the see everone saturday. Robert , I hope this
> better;
> I am formatting this e-mail as html. I apologize for the formatting problem.
> Agent
> M, I am using MS exchange web-mail client for my e-mails. Thanks Jon, I
> will do
> that tonight. :You may want to put snd_driver_load="YES" in your
> /boot/loader.conf
> and then reboot to see if this gets the card working. got the driver to
> connect
> to the: kldload sound
> kldload
> snd_neomagic pci1: <multimedia, audio> at device 0.1 (no driver attached)
> and
> was able to use cdcontrol and mixer for audio control.
Hi Cecil:
Xfce 4 should have a mixer control included.
> config issue 2; I have
> a few cd and dvd application but they can't access the /cdrom or the
> /dev/acd0 device
> there should be a log file the might give me a clue. I am running Xfce4
> desktop
> environment with xfmovie for dvds and xfcd
See if the instructions here will help:
17.7.2 Configuration
You also have to enable DMA access for ATAPI devices, this can be done
in adding the following line to the /boot/loader.conf file:
hw.ata.atapi_dma="1"
Before attempting to use the dvd+rw-tools you should consult the
dvd+rw-tools' hardware compatibility notes for any information related
to your DVD burner.
Note: If you want a graphical user interface, you should have a
look to K3b (sysutils/k3b) which provides a user friendly interface to
growisofs(1) and many others burning tools.
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/creating-dvds.html
K3b is a Kde program and Scott could help you with that.
http://www.k3b.org/
--
Kind regards,
Jonathan
_______________________________________________
CWE-LUG mailing list
[email protected]
http://www.cwelug.org/
http://www.cwelug.org/archives/
http://www.cwelug.org/mailinglist/
