I am confused by the operation of the channel mixer. If I open the mixer and look at the Red channel the 'red' value is nominally set at 1 ... if I now move the red slider to a lower level I would expect that the red values are diminished over the entire range but what appears to occur is that red values are minimized from the high end of the scale leaving the low end untouched. If I push the red value down to .500 then the entire red section of the histogram is bunched in exactly 1/2 of the scale.
I am not sure at all what the intention is with this module when used with values < 1. David ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ Darktable-users mailing list Darktable-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/darktable-users
