Il 29/04/2015 21:46, Johann Spies ha scritto: > I am trying out 1.6.6 now. > > It showed the same behaviour. I was unable to use the gui to disable > OpenCL, but then edited ~/.config/darktable/darktablerc to disable it. > > Since then it did not hang again, but broke at least two times. The > last time the error was: > > exiv2] Removing 3 characters from the beginning of the XMP packet > > [exiv2] Directory NikonPreview with 8224 entries considered invalid; > not read. > > *** Error in `darktable': free(): invalid next size (normal): > 0x00007f30a81c2470 *** > Aborted > > > lspci-output: > > 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core > processor Graphics Controller (rev 09) > Subsystem: Lenovo Device 3902 > Kernel driver in use: i915 > 00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset > Family USB xHCI Host Controller (rev 04) > -- > 01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce > GT 635M] (rev ff) > 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) > Subsystem: Lenovo Device 3975 > Kernel driver in use: r8169 > > Try to run Darktable with command darktable -d all then upload somewhere (pastebin?) the logs
------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Darktable-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/darktable-users
