Hello.
David Brownell wrote:
That's trifles -- 'struct mux_config' which will take
up really much space with DA830's 400+ controllable signals.
Not really.
It also is optional kernel feature, luckily. Although with the
current OMAP-L137 EVM bootloaders you'll want that option enabled -- or
you won;t get MMC, on borad audio, etc. It's a mistrery why the
bootloader doesn't configure them by default.
It might be *nice* to have all of the pinmux
options pre-defined, but it's not *necessary* to do that.
Consider how OMAP works: well over 400 signals that could
be exported on most chips, a few hundred muxable pins with
up to eight primary settings each. (And on OMAP3, several
additional settings for pullup/down and off mode.)
But not all those options are pre-defined ... they get
added as needed to support various boards.
We have them all entered already. Sorry. :-)
- Dave
WBR, Sergei
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
