Hi,
I am working on DM355 EVM Board. I want to update the bootloader image
to the NAND flash memory of the DM355 EVM Board using the UART
Interface.
I have gone through the details given in the following link:
http://wiki.davincidsp.com/index.php/Serial_Boot_and_Flash_Loading_Utility
But I am not able to update the bootloader to the NAND flash memory.
Please help me to solve this issue.
Log Message
###########
[r...@tharma GNU]# mono ./sfh_DM35x.exe -nandflash -v -p /dev/ttyS0
ubl/ubl_DM35x_nand.bin
/home/tharma/project/ip_net_cam/dvsdk_1_30_00_40/PSP_01_20_00_014/bin/dm355/u-boot-1.2.0-dm355_evm.bin
-----------------------------------------------------
TI Serial Flasher Host Program for DM35x
(C) 2009, Texas Instruments, Inc.
Ver. 1.50
-----------------------------------------------------
Flashing NAND with ubl/ubl_DM35x_nand.bin
and
/home/tharma/project/ip_net_cam/dvsdk_1_30_00_40/PSP_01_20_00_014/bin/dm355/u-boot-1.2.0-dm355_evm.bin.
Attempting to connect to device /dev/ttyS0...
set_signal
[r...@tharma GNU]#
Regards,
Tharmarajan G
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
